Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

I think I am Burned Out.

Posts

I think I am Burned Out.

#1

I think I am Burned Out.

Tom

I just read the link "Acts of Creation" in the thread Economics of Woodworking.I did finish carpentry and woodworking for 25 years. I have a full shop just 70 feet from the house yet I spend my time working on bicycles! My woodworking shop is full of bikes that I am working on. My new passion?

It seems I cannot muster any enthusiasm to do any type of woodworking.I still do small carpentry jobs but I would really like to get back into it.

Not sure how...

Re: I think I am Burned Out.

#2

Motovation

Bill Tindall, E.Tn.

You need "customers".

Not many generations ago if one needed a table one went to the local cabinet shop and had one made. This approach has become impractical to most because of the cost of hand made furniture . But if the local cabinet maker works for free.......the concept needs to be reconsidered.

A case in hand. I made 3 spice box jewelry boxes for the women in my family some years ago and swore never again. All those tedious tiny drawers. Then two granddaughters came along and I am making two "improved" versions.

Youngest daughter wants a table for her den. Oldest daughter needs end tables and coffee table and bed room furniture. Granddaughters will soon need beds. Every time I purchase symphony tickets I ask, "do you need anything in the office repaired" (the office is used furniture, good quality but old. )The list is endless. I have developed the skills to do this stuff. This ability should not be wasted.

On the other hand if your "customers" ride bicycles then build them. Alternatively, teach a class in finish carpentry, remodel you daughter's home or the office of some charitable organization, make a piece of furniture for family, friend or charity, etc etc.

Re: I think I am Burned Out.

#3

I look at it differently

Gary Smyth

First, read Keith Newton's link below. My theory is that when you get to a certain level the interest wanes because you know how to do it. To be sure there are new things to learn and processes to improve, but the learning takes longer, precision more important, and comes in finer bits. By that time you have the "eye" or you don't.

For you bicycles are new. There is more to learn in "bigger" bits. and it's not that you won't do woodworking anymore, but that a new set of skills is being developed. Sooner or later when a certain level is achieved, bicycles too will become less important and something new (or old) will come forward.

In my case the change was from wood to working metal. I still hit the shop for working wood, and I do try new things but I spend more time trying to figure out metal and "heats", and fabrication. In my mind I'm learning more now with metal and with the thought I plan on merging the two if ever I get to the point of comfort in both worlds.

My feeling is that you need to do what satisfies you. For you it's bicycles, for others it might be cooking, or cars, photography, or skydiving. Don't panic or feel burned out, it's OK to expand a bit to keep you going. Your skills and tools are still around.

Re: I think I am Burned Out.

#4

New Hobbies

Jerry Nicholson

My latest hobby is procrastination. I was going to join Procrastinators Anonymous but I never got around to it. Just as well - they keep postponing their meetings anyway.

Jerry

Re: I think I am Burned Out.

#5

Re: New Hobbies

Mike Potts

Tom, I was in a similar place, I had remodeled, kitchens, baths made all the cabinet, made a lot of the furniture in my house,and been making x-mass gifts for the family the last ten years. Like you I have a pretty complete shop, but I had lost interest in going down there very much. Last fall I bought the one tool I didn't have, a lathe. I'm a addicted turning junkie now, something new to learn or try every time I step up to the lathe. If you've got the money for it and would like to get back into the shop it a great way to go.

Best regards

Mike

Re: I think I am Burned Out.

#6

Agree

David Yoho

To piggyback on your points, I would say I agree. As hobbies go, how many of us only have one? I have several that keep my interest.

I have been burnt out from woodworking several times through the years but always found a renewed interest. It's certainly something I do that I'm passionate about. One of the things that caused me to back away in the past was I needed a break. That was back while I was working a full-time job, trying to raise a family, and work on commissioned work at an almost full-time pace in my shop. A little break was all it took.

Now since I've been retired I find my shop time to be less. I guess the main reason is since I have more time to myself I'm enjoying getting to all those home projects that always took a back seat while I was working.

I do expect to get busy in my shop soon because there are things I want to make for our boys, as well as a few pieces I've wanted to get to for our home. I'm actually looking forward to it. With winter coming the outdoor work will end and I'll have the time to spend in my shop.

It's not uncommon to get burnt out doing anything. When it happens it's best to back away, do something else, and if it's a passion you'll go back.

Re: I think I am Burned Out.

#7

kid next door

Bruce, a MN Galoot

came up to me the other day, waiting for his football practice to begin. He wandered around the shop for 20 minutes, asking about tools, how to build stuff, things like that and I'm thinking, here's my new inspiration. I love passing along skills.

I retire in December, and while my shop time is limited in MN winters, I won't live in a community without kids. They bring life into a community, and this kid is just living proof of that. No better motivation than teaching.

Re: I think I am Burned Out.

#8

Re: I think I am Burned Out.

BrianMonumentCO

I am not sure you are really burned out.

I think that the human animal needs to learn something all the time.

You sound like you are well learned in finish carpentry.

But bicycles are your new learning thing.

For me I spent 25+ years in software development doing security things, then UNIX and C, then TCP/IP, then decnet, telephony and system operation of a 24 x 7 production system.

Then I left that rat race and went to gunsmith school.

Gunsmithed as a Journeyman at a shop that wound up on TV.

Opened my own shop.

Now it is time for me shut that shop down and retire.

With all the topics and sub topics it seemed like every 3 - 4 years I had a new thing going on.

Always learning something new and making it work.

Re: I think I am Burned Out.

#9

12Re: kid next door

Yonak

1bf

Interestingly and comparatively, a guy who I sell wood shavings to sent his grandson to pick up a load the other day. As with the boy who visited your shop he seemed very interested in the happenings in my shop. ..But he didn't care to know how anything was made or how any tools operate or what they do. All his questions were, "How much do you get for this ?" "How much do you get for that ?"

Re: I think I am Burned Out.

#10

Re: Snap out of it...

TomD

You can make wooden bicycles, both wood, and bamboo. There are various parts you can make, I made bamboo fenders, and a wooden set of panniers for my mom. There are grips, chain guards, wheel rims etc... I have a project in mind for a wooden framed seat.

http://www.renovobikes.com/

http://www.blids.nl/gallery/PlywoodRecumbentBuildingworkshop2003

My approach is to build stuff I want. Mostly that is technical products, my first technical woodworking project being a laminated, bent, canoe paddle, back around 1977ish. The next was a canoe I designed. Wants are unlimited, so the production hums along. It is supposed to be fun, so I don't sweat it if a particular project drags, they will all get finished eventually. And if not, no biggie.

Since I am an individual, I have specific needs. Bike wise I am tall, have short legs for my size, weigh X, and so forth, so I am into framebuilding in metal also. If I have a need that is not met in the marketplace, then I make the product myself. My ability to make things for bikes translates into tool making.

Right at the moment I am working on a line of Tactical Poling Skiffs. Currently the tecnical poling solo flats skiff is on my sawhorses. This is a unique design I did for my local waters, etc... I have built a sit down skiff, a catamaran poling skiff. There is a technical poling canoe, I am developing. I also have a simplified solo poling skiff I hope will be easier for others to build, though I don't know why I bother since I don't sell plans. I also want to do a drift boat. I also have an idea for a green source energy tactical poling mother ship, while I have an idea for that, I don't really feel any gel yet. Further down the line I have some solo canoe designs I need to get to. I am also working on completing a 2 seat ice boat I got plans for over 20 years ago, and the whole thing got buried under a wood pile during my last move. And this is just one of my project areas. I make all kinds of other stuff. One metal project is a MEGA fly tying vise. I am making all kinds of attachments for my sewing machines...

I admire Bill's desire to build for clients, it's a charming family centred approach with the promise of immortality, but the reality is that other people are too ignorant to get what it is we do. They will like the table, or whatever, without really knowing what they are looking at; or because it was made by someone they love. Not to mention it was free. That seems like a waste of time, when one could be working for a far more cultured client with unlimited needs. I've been at this stuff for arguably 42 years, or even longer. That not only means I can make the stuff I want, but I have 42 years appreciating my unique products. There just isn't a client out there anywhere in the world who can offer that. And yeah, I have my tongue in my cheek a little, I am not "that crazy", but it is also true. My mother makes certain foods that are probably world class, but even if they aren't I have 55 years appreciating them. The ideal client appreciates your work better than anyone else. Craftsmen talk about getting maybe one client like that in a lifetime. And the usual metric is just that they keep writing checks. Like the Rockefellers for Nakashima (?). Well I have a client like that. He has bought my full production, and has been with me as long as I can remember, and he has a very representative collection of my work...

Re: I think I am Burned Out.

#11

To repeat.....

Bill Tindall, E.Tn.

"Dad, will you make me a dining table", is all the motivation most will need to get into the shop.

"Customers" (family, friends or charity)are a large part of my motivation. Leaving something lasting behind is another. The challenge of mastering something new a weaker 3rd motivator for me. In the past it has been to make something I could not afford to buy. But I have all this stuff now so this motivation has passed.

The stated motivation of the best furniture builder in our area is to have furniture he could otherwise not afford(18th century reproductions). The prime motivation of another woodworker I know well is the challenge of a challenging build ( he makes 18th century reproductions).

Re: I think I am Burned Out.

#12

Re: I know that I am Burned Out.

ChuckinND

I've been around long enough to see how things are, and it's not good.

Re: I think I am Burned Out.

#13

Re: To repeat.....

TomD

I have to confess that nobody has asked me to make a dining room table, since the oldest girl is only 17. But if they do, I was already booked up for life, probably 20 years ago. And then I didn't stop taking orders. I will have to see whether I crack when the plea comes, or not.

Re: I think I am Burned Out.

#14

I have stalled at times myself...

Grant in Iowa

I have stalled on projects and motivation at times myself. Demands of families, jobs, and perhaps my own big mouth keep me busy enough without building things on the list. It seems that while I identify myself as a woodworker, the truth is that I am a jack of all trades.

One thing I do when a project stalls is to choose a piece of it and take it to completion. It seems for me that process of finishing a piece of wood is quite a motivator.

Right now I have a night stand that is needing only the final fitting to be complete, but it has sat collecting dust in my shop for nearly a year. Hopefully, this thread will be the catalyst that will get me going on it again.

Like Bill, I have a long list of projects I have committed to, and many more I want to do. I seem to be a master of acquiring the machinery, tooling, and materials to build stuff, but it's that darned execution part that gets me.

There is some comfort in knowing I am not alone.

FWIW,

Grant in Iowa