Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

6 Oct 2014

Good Morning Everyone,

Spent some time getting some dirt work done around the addition that was added to the house. Got a good bit done but it's slow because I no longer have the tractor with bucket to move the dirt so it was back to using shovels and the little pull trailer behind the lawn mower. Slow but we got done what I needed to get done. I'm sore from all the shoveling but I guess that just means that I need to do that more. :)

Been getting some of the western cedar work done in the sun room and I hope to have that done this week. I really need to get all the loose ends tied up so I can claim that it's ALL done, but I can't seem to find the energy and the time any more. Work is taking a good bit of time and energy and that comes before my needs around the house. It pays the bills and it is what it is. In time...I'll have it all done.

That's it for me, so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Attended YoYo  Ma concert

Bill Tindall, E.Tn.

Just amazing performance to a rapt audience (Elgar and encore of Bach Cello Suit #1). Son in law reported that he was an exceptional gracious person having chatted with him in the wings before a State Dinner at the White House. Indeed, after the performance he mingled with the orchestra thanking them for their work in accompanying). And then he chatted with audience to ask what they would like for an encore. It was a nice change from the celebrity jerks often in the news.

Re: WC Weekend Accomplishments....

#3

Re: Attended YoYo  Ma concert

Barry Irby

Never seen him in person, but I saw an interview where he confessed he had left his cello (About $500,000) in the back of a cab. He got it back. He chuckled and said, "what, you never left your brief case behind?"

Re: WC Weekend Accomplishments....

#4

Split some Red Gum....NOT!

Bill Tindall, E.Tn.

Neighbor gave daughter some firewood. It has been stacked but not split for 9 months. It looked like a mix of red and white oak, from the bark. It was cut in short lengths and I presumed it would split readily, and did for the most part. But the stuff that looked like white oak bark was something else. I hit a piece only 16" long by 12 diameter with 8 pound splitting maul and the result was a dent. There was no evidence of any crack propagating. Several more well placed blows had a similar effect. I placed one, and then a second wedge in the dents and drove them until they were buried in the top of the log. I added a third wedge part way down the side in the hopes of freeing the top two wedges, with no favorable result. Then I cut one, and then a second wooden wedge and drove it to its length, which freed the steel wedges. Using the blade part of the splitting maul I chopped the two pieces apart, all the while exclaiming that in all my wood splitting I had never encountered such a recalcitrant stick of wood.

Later that day as we wandered around her property (Greenville, SC) I spied similar bark on a tree and its leaves revealed it to be Red Gum. Apparently Red Gum is the toughest wood mother nature designed.

I returned home with a log section which I will saw wood splitting wedges from. I expect I can pound on them for some years before they in turn split.

Re: WC Weekend Accomplishments....

#5

Went to the cabin...

Keith Newton

Did a little work around it, but mostly was out in the woods working on hunting stands.

On the way back home this morning, as I was passing through where a storm late last week had blown down a lot of trees, I turned off to follow it's path. Behind one old home, I spotted a log truck being loaded, so I pulled in. I was a bit surprised, and pleased to see that they had a pair of mules that they were skidding the logs out with. After leaving, I wished I'd done some photos or video of them working. They sure made it look easy to move those logs around, with minimal damage to the terrain, compared to those gigantic skidders being used now.

Re: WC Weekend Accomplishments....

#6

craigd

Made metal *PICS*

craigd

Made a stop for my mill vise - it is for repeatedly positioning of stock in the vise.




Re: WC Weekend Accomplishments....

#7

Re: Split some Red Gum....NOT!

Barry Irby

I don't know from personal experience, but have been told that gum is nearly impossible to split across the middle, but you can split pieces of the perimeter more easily. Take a thin slab off the edge, turn it, take another, making the piece smaller in diameter as you go. Don't know, but it might be worth a try.

Re: WC Weekend Accomplishments....

#8

Re: WC Weekend Accomplishments....

Bob Hayward

Saturday afternoon / evening I assembled, installed and wired my new 3520b. Sunday the first thing I turned was a small Laurel Oak bowl blank so thin one side blew out. Shavings were flying so fast and easy a check of thickness did not occur to me. Wow, this new lathe is powerful compared to my Delta 46-460.

Bob

Re: WC Weekend Accomplishments....

#9

Re: Split some Red Gum....NOT!

Keith Newton

Bill, I suppose you are talking about Liquidambar styraciflua, commonly called American sweet gum, instead of (Eucalyptus camaldulensis). While I have to agree with you that it is tough to split, I don't think it would be all that great for wedges. It is only moderately hard on the compression perpendicular to the grain, having an average value of 850, while I'll bet you could get your hands on some Black Locust which has double that @ 1700.

Besides that, if you happen to leave it out on your woodpile for a couple of weeks, it will still be good, while the Sweetgum might have already started to decay, along with insects moving in.

Re: WC Weekend Accomplishments....

#10

Ellis Walentine

Sweet design

Ellis Walentine

Nicely done, Craig. I can't quite figure how that set screw works with the bottom barrel and the slide nut under the bed, but it's clearly a solidly built fixture. Lotta good lessons here.

Ellis

Re: WC Weekend Accomplishments....

#11

craigd

Re: Sweet design

craigd

Thanks!

Does this help?



All mill tables have tee slots in them, like a lot of drill presses. The cap screw ties the shaft to the base to the tee nut to the tee slot.

Re: WC Weekend Accomplishments....

#12

Re: WC Weekend Accomplishments.... *LINK*

Kevin French

Spent the weekend paddling Eagle Lake on the Allagash waterway in Maine looking at Forestry stuff. We found a grove with a couple White Pines 120' tall, and nice grove of Old Growth Hardwoods, an Old Logging Train that hauled Plupwood and a tramway that saw logs.



And learned to make great Bush coffee




slideshow to the rest of the pics

Re: WC Weekend Accomplishments....

#13

Ellis Walentine

Great pix, Kevin

Ellis Walentine

I always wanted to canoe the Allegash. Thanks for the vicarious tour. Looks like an awesome trip. Hard to believe they got all that heavy equipment into that remote place.

Cheers,

Ellis

Re: WC Weekend Accomplishments....

#14

Re: Great pix, Kevin

Kevin French

We paddle the Allagash this summer, one of the group was a forester and wanted a longer look at the trains and the tram, when I told him there were Old Growth Groves there he was hooked.

The locomotives where hauled in from Canada by Lombards along with 60 flat car and all the equipment and materials to build the RR in 1927.

http://i56.photobucket.com/albums/g179/sweeper54/Allagash%2014A/P1200774.jpg


img

Re: WC Weekend Accomplishments....

#15

Kneale Brownson

Re: Made metal *PICS*

Kneale Brownson

Great idea.

I sometimes use my Bridgeport for router work, so I can appreciate your stop.

Re: WC Weekend Accomplishments....

#16

Re: WC Weekend Accomplishments....

William Duffield

What made the piles of rocks in pics 25 through 30?

Re: WC Weekend Accomplishments....

#17

Re: WC Weekend Accomplishments....

Kevin French

A Ranger says 'White Fish', a fisherman says' There ain't no White Fish in here'.

We saw 50+ of these mounds in that brook and in another. I've googled it, posted the pics to a couple other groups but I still don't have an answer, but still working on it.

Re: WC Weekend Accomplishments....

#18

Re: WC Weekend Accomplishments....

William Duffield

What, not Masonic pyramid building beavers? ;)

Aha! That makes sense. I spent a lot of time thinking about what might have built them. It must be some very determined fish to expend that much energy to build spawning beds. I realized that the water level is very low since it is autumn, but would be much higher in the spring when they might have been built. And that's when fish would probably be using them. I have no clue about the particular type of fish that might have built them, but you might derive data about the size of the fish from the maximum rock size they would be able to move.

Re: WC Weekend Accomplishments....

#19

Re: WC Weekend Accomplishments....

Kevin French

Size is the thing, there were some 1- 1 1/4" rocks in the piles