Inlay Pt II
Alan Young
In an earlier post (Give it a Rest) I showed how I set four Quarter Rest elements into a panel for one of the Sheet Music cabinets I'm working on. Here is the process for the other cabinet-Which I actually did first. This cabinet has some Art Deco elements to compliment my client's guitar.
NOTE: Some of these pictures are of my practice run ..The Diamond element show on top of the Art Deco plumage is really set at the bottom
I start by cutting out the pieces on the band saw.
The center maple sections are cut to a wedge shape then walnut pieces glued on either side.
After the glue sets the walnut pieces get trimmed to the same wedge shape then second section maple pieces are glued to the walnut.
The secondary maple pieces are trimmed to the wedge shape.
Now the profile is outlined over the panel and the shape is cut out with chisels..
I remove the Anigre Veneer then the first layer from the plywood.
Sections are ready for glue and the elements.
I tap the pieces into the openings.
After the glue sets I trimmed the sections flat with saw and sanded smooth.




