Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

29 Sep 2014

Good Morning Everyone,

I thought that since I was still up and working on my oncall duties that I'd go ahead and post for the Weekend Accomplishments in hopes of me being able to sleep a bit in the morning (today). Oncall has been fairly steady this weekend but not crazy bad. The good news is that I come off oncall duty in less than 8 hours and I get to sleep with both eyes closed tomorrow night (Monday).

The MIL is now living full time in her new apartment and really enjoying it. She's about to be unpacked well enough to call it done. I still have some things to finish up in the sun room and garage but I'm getting closer to being done. The LOML has been working on the outside getting some of the landscaping stuff done. All I can say right now is that I'm pleased with the results and I'm happy that she is happy to be living in her apartment now.!!

That's all for me, so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

craigd

Nothing wood related

craigd

Made some [metal] lathe tooling. It is for setting the height of lathe bits. Four pieces pressed together (with LocTite for good measure).


Re: WC Weekend Accomplishments....

#3

Scored a Powermatic 66

Bill Tindall, E.Tn.


I have been patiently looking for a Powermatic or Delta for son in law. Found one at last for $600. Even has a mobile base and seems to be well cared for.

Re: WC Weekend Accomplishments....

#4

made a peavy handle

Bill Tindall, E.Tn.

Log rollers are not easy to find at our flea markets. I got this one cheap but it had a broken handle. I has taken longer to get it in good working order than anticipated.... a potential problem with used stuff.



Re: WC Weekend Accomplishments....

#5

Became a scultptor

Grant in Iowa

A couple weeks ago I volunteered myself to build a 3d sculpture of an image that appears in author/ illustrator Peter Sis' book "The Three Golden Keys". The work became part of the new exhibit "Peter Sis, Cartography of the Mind", which showcases many of Peters incredible illustrations. I worked with our Librarian and a volunteer to complete the project in my shop. A few long evenings later, and with other deadlines suffering, we completed the work.

Simply titled "The Librarian", it takes center stage in Grand Hall at the National Czech and Slovak Museum & Library here in Cedar Rapids. Mr Sis was featured at the opening, and he and I talked about how it was not easy to create a 3d object by using a reference that is 2d, and one not really drawn to be built.

The team and I were hailed as sculptors, a title that I had never considered for myself before.

Regards,

Grant in Iowa<---back to those other deadlines

Re: WC Weekend Accomplishments....

#7

Re: Became a scultptor

Thomas S Stockton

Grant

Peter Sis' books are absolutely amazing and some of my favorite books to read to my son when he was younger, although they are sophisticated enough to be enjoyed by adults.

An interesting small world thing is that my aunt Francis Foster was his editor before she passed away last year.

My favorite book of his is the one about Tibet.

Thanks

Tom

Re: WC Weekend Accomplishments....

#8

Re: WC Weekend Accomplishments....

Jerry Gibbs

Cleaned out a seriously clogged dust collector filter. It has paddles to shake out the dust but they do not do much. I wonder of a vibrator of some sort applied to the outside of the filter would help.

Making a porch swing for sister and brother in law. BIL "helped". We took a picture of him routing a roundover on a slat with a laminate trimmer. He immediately had to email the picture to a friend. Jerry

Re: WC Weekend Accomplishments....

#9

Re: WC Weekend Accomplishments.... *LINK*

William Duffield

I spent Friday and Saturday at the Hearne Hardwoods open house and Lie-Nielsen event, recruiting new members to the Society of American Period Furniture Makers. In addition to talking about and showing the many benefits of membership, we had several pieces of reproduction furniture on display and demonstrated period techniques and tools.

I didn't buy anything, neither figured hardwood nor shiny tools (or even raffle tickets), even though there was much being offered to tempt me.

And, No, I did not bring up chip breakers with the Lie-Nielsen staff. They were doing just fine on their curly maple with sharp blades, tight mouths and high bevel angles. Warren did have a little fun at their expense. He had a scrap of well seasoned Hedge, one surface he had planed smooth about 30 years ago with a Stanley Handyman jack plane, using a properly closely set chip breaker, and another recently planed surface. He asked one of the L-N toolmongers if they could plane it. Fail! It came back with major new tearout, that I would estimate was almost 3/32 of an inch deep.

As usual, if you had asked about my list of woodworking unacomplishments, that might have been interesting, as there are lots of projects still on the todolist. I did take lots of photos at Hearne's, and some of them may eventually show up on the SAPFM forum, and maybe here too.


http://sapfm.org

Re: WC Weekend Accomplishments....

#10

Very little woodworking, but ...

Hank Knight

I caught 20 pounds of shrimp:

[URL=http://s50.photobucket.com/user/hankknight/media/DSC_0056-C.jpg.html][/URL]

[URL=http://s50.photobucket.com/user/hankknight/media/Saint%20Helena%20Island%20September%202014/imagejpg1_zps94e660fb.jpg.html][/URL]

Re: WC Weekend Accomplishments....

#11

At work...

John in NM

Doing the more highly paid mechanic's job for him, yet again. I have to learn to say no or find another job! :D

Re: WC Weekend Accomplishments....

#12

Re: WC Weekend Accomplishments....

Keith Newton

Does building 2 pressure treated pine deer tower-stands count? Like a lot of weekends, it seems I have to work harder when I go to the cabin than during the week.

My nephew and cousin ask me If I thought we could build them to be towed behind a 4wheeler out into the woods, so I made them to be broken into components. The legs are on skids, which form an A-frame that the deck and stair slip into, giving it a low center of gravity and narrow skid path.

The ladder runs from one skid up beside the legs, to a band-joist on the other side, which is longer than the deck. You have to step off to the side when you get to the top. They are 62" square, which works for setting a pop-up camo blind on top. The ladder also has a handrail, which makes it easy to climb, just in case any,( Ahuummm, throat clearing), older hunter with bad knees wants to use it.

I'm thinking that I should publish plans of it before next year. There are so many horribly planned stands being sold around here. It seems that none of the people making them knows what a triangle is, or how important they are to making things strong. Most of them are so wiggly, that you need to stop breathing to take aim.

I did manage to do two nice Elm turning last week though, and I think I already have one of them sold, if it dries without self-destructing.

Re: WC Weekend Accomplishments....

#13

Re: WC Weekend Accomplishments....

Joe in a Cleveland suburb

Delivered the little Shaker Round table to my daughter and her husband.

They both like it. I'm happy. Got home an hour ago.

Sure is a beautiful area down there (Blacksburg, VA.)

Re: WC Weekend Accomplishments....

#14

Re: made a peavy handle

Joe in a Cleveland suburb

Nice job on the handle.

That is a big looking lathe you have there!

Re: WC Weekend Accomplishments....

#15

Re: Scored a Powermatic 66

Matthew Robinette Mt Juliet Tn

That would look good with a 30" Biesimeyer fence. I have one new in the box that I bought when Lowes discontinued the line a few years back. Let me know if interested.