Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Tuesday Night Hand Tool Chat - scrub plane

Posts

Tuesday Night Hand Tool Chat - scrub plane

#1

Stephen Shepherd

Tuesday Night Hand Tool Chat - scrub plane

Stephen Shepherd

It is Tuesday and once again we gather to discuss the weather and HAND TOOLS, and tonight's topic is the use of a scrub plane. Not what you might think, they were used for dimensioning boards not for thickinessing.

The fun all begins at 9:30 o'clock PM Eastern Time and runs for one scheduled hour. Just click on CHAT ROOM on the left and join in.

All are welcome, hope to see you there.

Stephen Shepherd

Host - Hand Tool Chat

Re: Tuesday Night Hand Tool Chat - scrub plane

#2

and the difference is?

Bill Tindall, E.Tn.

"they were used for dimensioning boards not for thickinessing."

Re: Tuesday Night Hand Tool Chat - scrub plane

#3

Stephen Shepherd

Width vs thickness


Re: Tuesday Night Hand Tool Chat - scrub plane

#4

contrary experience

Bill Tindall, E.Tn.

I have several old pieces with scrub plane tracks on the non-show surfaces.

Re: Tuesday Night Hand Tool Chat - scrub plane

#5

Re: contrary experience

BrianMonumentCO

Bill,

Two questions

1. how old is old for your sample.

2. is it possible that you are seeing radiused blade from a jack vs a scrub plane?

Thanks.

Re: Tuesday Night Hand Tool Chat - scrub plane

#6

Response

Bill Tindall, E.Tn.

1. how old is old for your sample. (samples) about 1850's. However, the non-show sides of the antiques I encounter typically have scalloped texture from "rough" leveling and dimensioning of the surface

2. is it possible that you are seeing radiused blade from a jack vs a scrub plane? So what is the difference? Personally I use an old #5 for a "scrub" plane. Does a scrub plane have a specific characteristic that would clearly distinguish it from any other plane that had a gaping mouth and radius blade?

Re: Tuesday Night Hand Tool Chat - scrub plane

#7

Re: Response

BrianMonumentCO

My curiosity is the offshoot of the main topic of the Tuesday Chat topic which was the scrub plane.

My questions were intended to see if people were seeing a scrub plane or a jack with a cambered blade.

Question 1 is what was used prior to stanley and other introing the scrub plane we know of?

Question 2 was were people using a jack with the cambered blade? Or some special plane?

Re: Tuesday Night Hand Tool Chat - scrub plane

#8

Re: Response

Bill Tindall, E.Tn.

It seems we both have the same questions. One might guess with the "any port in a storm" philosophy of a typical 1780 furniture maker trying to make a living, that a worn plane intended for some more refined task might have been pressed into service for the task of the scrub plane just as some of us use an old Stanley today.