Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Three Tidbits from the power plant visit

Posts

Three Tidbits from the power plant visit

#1

Three Tidbits from the power plant visit

Barry Irby

Visited the local coal burning power plant with three friends today. (yes, my life has been reduced to the occasional field trip on the short bus.)

Several things came out that I thought were interesting. They burn 100 train car loads of coal a day. They grind it to dust a fine as talc a blow it into the burners.

They gave us excellent ear plugs and I was walking around on concrete and steel grating. I was surprised at how much noise came up through from inside as my heals landed. Either I need to learn to walk better with a softer step or get shoes with better padding.

I have a single bag on my dust collection system. They run the flue gases through a bag house and they have thirty thousand bags.

One of the by products of their scrubbing process to reduce pollution is gypsum. They basically let USG Control the process and give them the Gypsum and they make drywall out of it.

A nearly interesting way to kill a morning.

Re: Three Tidbits from the power plant visit

#2

Re: Three Tidbits from the power plant visit

Hank Knight

We have a coal-fired power plant here that uses the same powdered coal process. Except for the CO2, the emissions are minimal. I don't have room for 30,000 dust bags.

Re: Three Tidbits from the power plant visit

#3

Me neither,,,,

Barry Irby

Another interesting thing was that the foot print of the plant had increased dramatically (maybe 8 times) over the last ten or fifteen years and all of it was for the environmental controls.

Re: Three Tidbits from the power plant visit

#4

Re: Three Tidbits from the power plant visit

John in NM

The powdered coal method is used in the making of Portland cement as well.

Re: Three Tidbits from the power plant visit

#5

That would be 100 train cars

Bill Tindall, E.Tn.

A car is 100 tons coal. A train is a 100 cars.

The sulfur in the coal is made into sulfate, then reacted with lime to get gypsum. Most of the particulate is taken out electrostatically.

100 cars of coal = a very large number of windmills or 1 nuclear plant

Re: Three Tidbits from the power plant visit

#6

I was taken aback...

Barry Irby

Yes, it was a 100 train car loads of coal a day. 130 on the really big days like the hottest or coldest day of the year.

They said that on several occasions they have spotted people ridding on top of the coal. Those people were very lucky they did not get dumped into the process by the giant machine that dumped the entire car upside down to dump it. (My friend said they dumped three at a time, but I missed that detail.) They also said the police were doing rock paper scissors to see who had to let the person covered in coal dust into their squad car.

They use the water from the local sewage treatment plant to run the process. A much cleaner and more consistent supply of water than the adjacent river. The use a Billion gallons a day. Clean it even further and run it through the boilers converting it into high pressure steam. I bet that kills of any remaining germs.

They went through the chemistry of the processes, but the info flew by me.

We went into the control room and they had the local good old boy running it. We asked him what excitement he had had lately. (Terrorists?, exploding boilers? Giant fire in the coal pile?) Nope, the cover fell off the fluorescent light above his desk and landed right in front of him that morning.

Re: Three Tidbits from the power plant visit

#7

Water useage

Bill Tindall, E.Tn.

The water that gets converted to steam, probably 1100 psi steam, is the most pure water one can make. Common impurities that are not volatile deposit on the boiler tubes and eat holes through them. This water is expensive to make and it stays in a closed loop of the boiler. As little as possible is purged. The main water use may be for condensing the steam to return it to the boiler. This water would be untreated river water. It gets sucked in cold, does its cooling and gets returned warm to the river, lake, etc.

Old style boilers fed lump coal on a moving grate. They produced a slag. They were inefficient. The modern boiler operates more like a fuel oil burner, quickly burning essentially all of the coal at a high rate. The coal dust is equivalent to the atomized fuel oil. The coal source is selected so that the ash does not melt in the process. It is recovered by electrostatic precipitation as a very fine dust which is mostly aluminum and silicon oxide. Getting rid of it is a problem if land filling nearby is not an option.

Re: Three Tidbits from the power plant visit

#8

Re: I was taken aback...

Stuart Johnson

PBS had a segment showing one of those coal trains being loaded at a Wyoming mine. The train doesn't stop. It pulls through and the cars are loaded as it passes under a conveyor.

Re: Three Tidbits from the power plant visit

#9

Re: Water useage

Barry Irby

The presenter in our case was a young woman who was principally involved in the environmental aspects of it all. She blasted us with enormous amounts of info. The Chemistry part of it blew right by. I sort of grabbed the concepts. They had scrubbers that sprayed water laden with reactants into the flue gasses, precipitating out some things. She did tell us that they used the effluent for the waste water plant, but cleaned it further. I suspect you are correct in that they used it to condense the steam and then dumped it into the river.

We were discussing the idea that if we went again and got a person from some other aspect of the plant, we would get a very different tour.