Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Bally block 2nds

Posts

Bally block 2nds

#1

Bally block 2nds

0ca0meron00000000000000000000000000000000000000000

Does anyone know if Bally still sells their 2nds/freight damaged material for cash out the back door? Here is a post from Ray Carson back in 2005 and I'm wondering if this is still available...

>Bally Block

P.O. Box 188

Bally, Pennsylvania 19503

Bally Block

30 South 7th Street

Bally, Pa 19503

Tel: (610) 845-7511

Talk to Russell

7:00am -3:30pm

Directions (from Philadelphia):

Take the PA Turnpike to the Valley Forge Exit (#24), proceed onto Route 202 South. Look for the Route 422 exit toward Pottstown. Proceed on Route 422 for about 20 - 25 minutes (give or take). Look for the Route 100 North exit. Bally Block is located on Route 100, just north of Pottstown PA. When you proceed down Route 100 through the small town of Bally, look for the Bally Hotel (also called Shenanigans). They are directly behind it.

Call and ask for Russell before you drive out there. Ask him what he has in stock if your looking for a particular size. CASH ONLY!

Re: Bally block 2nds

#2

Re: Bally block 2nds

cameron

Just noticed my name field was corrupted some how...

Re: Bally block 2nds

#3

Bart Goldberg

Re: Bally block 2nds

Bart Goldberg

I called them recently, and the foreman that typically handled this had hurt his back and was out on disability. He may be back by now, so I think that they still do this.

Bart

Re: Bally block 2nds

#4

Re: Bally block 2nds

Alan in Little Washington (NC)

They used to sell seconds and returns and would even sell maple stock to add your own vice jaws, aprons and legs. The nice old gentleman who did this was semi-retired and only worked part-time. Business was hurting so the plant was also on reduced hours. Revenue generated went to the company's recreation and activity fund.

I got an old 33' x 72" bench top from them that came out of a decommissioned Army depot. They ran it through the wide belt and also sold me some 6/4 maple that I used to make aprons for this: