Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

15 Sep 2014

Good Morning Everyone,

I'm still working on the finishing of the construction project. Seems and feels like it's never going to end, but my hopes are that I will be able to call it "done" within the next 2 weeks. I played bass guitar at church yesterday and then spent the rest of the day at the hospital sitting with a family and a dear friend of mine who had an accident and the family is now left with the decision to remove him from life support or long term care with him remaining in a permanent coma. Bob was a really good friend of mine, a brother motorcyclist, and one who has come to my aid on a few occasions when I had nowhere else to turn. I offer him and his family my honor, respect, and thankfulness on this very day.

That's all for me today, so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

OT Looking for a source-magnifier

Gary Smyth

Found on back corner of a shelf in a workshop. Need a bit of help trying to identify the pictured. I've found no original marks anywhere on the base, table, lens. The loose circular tag says #1, 1955 Pittsburgh. A former professor mentioned that he believed these were used in biology lab exams in the 1940’s but could be even earlier. Found a similar looking item pictured on Google dated 1928, but no link. The friend mentioned Bausch & Lomb and E.Leitz. Searched microscopes and got nowhere. Even joined/signed on to a microscope forum but again, nowhere. A quality tool. It weighs about 4 pounds, and when a solid triangular post is extended on brass rack and pinion gear about 9” high. Japanned black base. Most other metal is heavy brass. Flush screws. Magnifier on pivot arm can cover the whole field and is about 20x with high resolution. Mirror is mirror on one side and frosted glass on the opposite. I don’t know what to call it to look for a patent, manufacturer, date. I’ve not seen this before. Anyone remember these? Anyone have an old lab catalog where this might be presented? Would like to trace down (I believe) absent spring clips and possibly, value.

Re: WC Weekend Accomplishments....

#3

Re: Dissecting microscope?

Larry Clinton At Frankfort, (Central) Indiana

Did a little searching - I used microscopes for several years in my job as an Engineer (inspecting small parts and electronic boards etc.). I use some similar units as we had some equipment dating back to early 1900's. You might look at the item /page 62 at the following site.

http://www.gutenberg.org/files/35842/35842-h/35842-h.htm#Microscopes_for_Mineralogical_Research

You have to go down on the pages a bit but sure looks like it is very similar. Have no idea about today's value. Guess its worth what someone will pay!!

Re: WC Weekend Accomplishments....

#4

Sang

Bill Houghton, Sebastopol, CA

Our choir was invited for the first time to the American River Music Festival, up in the foothills in California gold country. We went up, hung out with choir members, delivered a rocking dance party Saturday night, then turned around the next morning and delivered an equally rocking gospel/spiritual/related songs performance. Small but very responsive audiences.

We then came home and zombied out.

Re: WC Weekend Accomplishments....

#5

Re: Accomplishments....

Mark Mandell - Gone Round In New Jersey

Saturday was wasted with office work; rain and drab anyway.

Sunday, however, was glorious so out the door

After my 4K loop, I settled down to some serious woodwork. As in opening up the log splitter, get it running with all the fluids filled, then getting out the chain saws to finish slicing up the huge oak we lost to Sandy. I had my tree guys do the prelims and haul it over to the splitter, but at 36" in diameter at the bole, it was about all I wanted to tackle with my 28" Husky.

Next I did my yearly maintenance of the big compressor (thread below) then opened up the chipper/shredder I'm giving to my son, sharpened the flails and the chipper blades and reassembled it. It now eats 3" oak without slowing down.

Re: WC Weekend Accomplishments....

#6

Larry

Gary Smyth

That's it. My base has no name however. Somewhere between 1955 and 1903 for hard source. Maybe older design if in a earlier catalog. Thank you. Now for this Winter's search for appropriate parts. This will work perfectly as is for close work like looking at edges of cutters, chisels, and router bits and with all the brass would look great if refinished as a display piece.

At least now I know what to look for in a search. Thank you.

Sometimes the collective abilities of WoodCentral members amaze me.

Re: WC Weekend Accomplishments....

#7

Ellis Walentine

Re: WC Weekend Accomplishments....

Ellis Walentine

My condolence on the loss or impending loss of your good friend, Dennis. That's a trial that none of us ever want to have to face.

My weekend found me in Winston-Salem, NC for the annual Woodworking in America show. I'm very pleased with the job Popular Woodworking has done with the show concept. It was also great to see a lot of old friends and listen to some excellent lectures and presentations, not to mention sampling some of the latest and greatest tools.

All in all, a great weekend.

Ellis