walnut slab desk
Jerry Gibbs
Finished a slab desk. Desk may have to be lowered. Could also use it as a small table. 
Knowledge You Can Build On — Est. 1998
walnut slab desk
Jerry Gibbs
Finished a slab desk. Desk may have to be lowered. Could also use it as a small table. 
Need
Mark Mandell - Gone Round In New Jersey
better photos, Gerry, so we can see it more/better.
I trust no hernias were sustained during the making 
Re: Need
Barry Irby
I was wondering about the hernias also. What does it weigh altogether?
Its a beauty. I also would like more pictures.
How tall is it? Why do you think it needs cutting down?
will take better pictures
Jerry Gibbs
I'm working on the pictures. Right now the top is 31.25" high. That is high for a desk, but I will be careful before I cut anything. The top is loose. I will probably locate it with dowels or Dominoes, but not glue them. I cannot lift the top by myself.
Re: better pictures
Barry Irby
You are right. 31"+ is tall for a desk. 29 or 30" is better, but then I am only 5'8" tall. Amazing what a difference an 1" or 2 makes.
Now you have to decide where to take the cut from. Do you want to lower the stretcher or leave it alone and take some off the top of the legs.
Re: Need
Doug Wolf
Nice looking desk!
Ellis Walentine
That reminds me of one made by Andy Rooney, which appeared on "60 Minutes" every week for years. The Nakashima-esque dovetail keys are lovely.
In the office-furniture world, executive desk height is generally regarded to be 30" AFF (above finish floor). Of course, the real realtionship that matters is the one between the user's anatomy, the height of the chair seat and the height of the desk itself. Your 31.25" height might be fine for a taller client or one with a higher-than-usual chair. I'd mock up some tests to determine the best height for all these.
Very nice. Please send more pictures when you can. Thanks for posting.
Ellis
Re: Need
Yonak
Good thinking, Doug. Lightening should take the stress off the abdomen muscles.