Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Which orientation for shelf dividers?

Posts

Which orientation for shelf dividers?

#1

Bart Goldberg

Which orientation for shelf dividers?

Bart Goldberg

I'm building a book case of sorts - but will add some vertical dividers between fixed shelves to create "cubbies" in the top most shelves. Do you normally orient the dividers with grain running vertically like the case sides, or horizontally? I was thinking that having the divider grain run horizontally would cause some wood expansion issues, since the dividers will be trapped in dados between shelves. I was also thinking that having the end grain of the dividers showing (if run horizontally) would not be aesthetically pleasing as well.

Thanks

Bart

Re: Which orientation for shelf dividers?

#2

Re: Which orientation for shelf dividers?

Jim Hoeller

Run the grain vertical.

Re: Which orientation for shelf dividers?

#3

Re: Which orientation for shelf dividers?

John McGaw

I've always seen it where the cross-grain of the shelves matched the cross-grain of the dividers. If your shelves have grain running lengthwise (and how could it be otherwise?) the divider grain would run vertical. Then, as the shelves change width with humidity, the dividers will follow. Actually, with normal conditions and average wood the movement shouldn't be noticeable but why take chances?

Re: Which orientation for shelf dividers?

#4

Re: Which orientation for shelf dividers?

AZ in Colorado Springs

You could easily add edging to cover the exposed end grain, but I think that would look really odd.

Re: Which orientation for shelf dividers?

#5

Re: Which orientation for shelf dividers?

Jesse Cloud

Run the grain vertically. Glue the dividers in the front of the dado only. Leave a little room in the back for movement.

Re: Which orientation for shelf dividers?

#6

Re: Which orientation for shelf dividers?

William Duffield

Why not glue them the whole length of the dado? The shelves and dividers, made from the same materials, and the carcass itself, should expand and contract at the same rate and in the same direction. (Sliding dovetails would be a different story, but for other reasons, and I don't think anyone has proposed them yet.)

Re: Which orientation for shelf dividers?

#7

Re: Which orientation for shelf dividers?

Uncle Jess

I dont see anything in the original post that indicates that dividers are the same material as the carcass.

Re: Which orientation for shelf dividers?

#8

Re: Which orientation for shelf dividers?

William Duffield

You're right, but they both at least have grain direction, so that's the simplest, and most aesthetically pleasing assumption.