Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Better TV Tray Design?

Posts

Better TV Tray Design?

#1

Better TV Tray Design?

don stephan

Long time customer asked me today to make a less flimsy TV tray for her husband. The new one is to be 3" taller, but if I repeat the traditional crossbuck leg design with single metal center strap under the platform a new one with slightly beefier stock won't be much less flimsy.

The customer knows that a beefier one-off table is going to be much more expensive than a flimsy store version.

Re: Better TV Tray Design?

#2

Re: Better TV Tray Design?

Robby Wright - San Marcos, CA

I've been thinking about this too. The trays we use have a stretcher down low on one set of legs and get in the way of my feet going under the tray. The wobble factor is ok as the joints are still tight. I have been thinking about putting a 6 inch wide stretcher on the back legs, but halfway between the hinge pins and the top. That should stiffen it up and not get in the way.

Re: Better TV Tray Design?

#3

Re: Better TV Tray Design?

TomD

I was thinking dining room table, so I am not the ideal guy to understand the need. However. Super great way to get a sturdy but light weight panel is with core. Core can be difficult to work with, but in this case you are making such a small panel, most difficulties would melt away.

So for example, the decks of my trimaran are made of 1/8" ply/1/2" balsa core/1/8" ply. Weighs the same as 3/8 inch ply but is about as stiff and strong as 1" ply. This because the balsa core is so hard. You can walk all over the core and it feels like concrete.

Re: Better TV Tray Design?

#4

Re: Better TV Tray Design?

Joseph Mulherin, sr

Don, one year I made 12 trays for Xmas presents for family. They were made just like a picture frame with a 1/8" bottom, 3/4x1.5x17"sides, and 3/4"x3.5"x12"ends slanted about 25" outside at top. The ends had holes drilled in and cut out like suitcase handles; then routered all over with 1/4" bit; then sanded and glued up up; then applied a clear poly finish.

All this material was 3/4" poplar.

Re: Better TV Tray Design?

#5

Re: Better TV Tray Design?

Thomas Skaggs, Foothills of Mount Level

For what it's worth...

If your client has asked for a TV tray, that's probably what they want. But just for "TV food for thought" I wonder if they would like a coffee table that has a top that elevates and moves forward to create a TV tray table? There are mechanisms for that. Anyway....just throwing it out there.

T.

Re: Better TV Tray Design?

#6

Re: Better TV Tray Design?

don stephan

I had actually suggested an "abbreviated" TV tray with short legs that would rest on the sofa around her husband. She wants the traditional style, that rests on the floor, to be put in a closet after each use.