Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Tuesday Night Hand Tool Chat - Handles

Posts

Tuesday Night Hand Tool Chat - Handles

#1

Stephen Shepherd

Tuesday Night Hand Tool Chat - Handles

Stephen Shepherd

Tuesday has rolled around once again and it is time to gather and discuss HAND TOOLS and related subjects, tonight's topic is tool handles, especially hammer and mallet and ax handles and how the grain is oriented in the head.

The fun and frolic all starts at 9:30 o'clock PM Eastern Time and runs for one scheduled hour. Just click on CHAT ROOM on the left and join in.

All are welcome, hope to see you there.

Stephen Shepherd

Host - Hand Tool Chat

Re: Tuesday Night Hand Tool Chat - Handles

#2

Re: Tuesday Night Hand Tool Chat - Handles

Gary smyth


Tonight’s tool chat is about handles. I will not be able to chat, but I wanted to vent about the dumbing down of tools, or buyers, or both.

Last Spring I cracked one of my favorite ax handles. Off I went in search of a replacement. After a decent local retail search I found two (bottom of picture). The plain handles were essentially identical and had $12.00 stickers on them. What I wanted was one like the shown in the picture second (and fourth) from the top. Note that the thinner sections in the old handles are no more than about 1 1/8" thick. (The straight handled "camp" ax is about an inch at it's thinnest.) Those two are comfortable, fit my hand, thin, lightweight, and, in use, have a “whip” to it. The new ones were fat, not nearly as curved, and clunky. There is no comparison to the shape and feel of the fawn foot between the old and the new.

In order to do what I wanted I took the bottom handle and band sawed the shape and shaved and sanded the thickness it to get me closer to the older handles, I added some stain but even though it is unmounted it does not have the feel that is the earlier ax handle.

Had I not decided to compare old and new, I likely would have accepted the new handle but instead I got angry about what is today an "acceptable" handle. $12.00 is not a lot of money, but it is if it is wrong, then I get ticked. In the case of the new handles, more is not more.

One option with my weekly garage sale travels was to do some checking. The other pictured axes are what I found, average price (and with head), $6.

I’ve stopped looking for axe handles, but I learned yet another lesson. Beware of new stuff. Look at older stuff to see what worked when craftsmen used more talent and less ease. Little things make big differences. Get what you want because it’s out there. I know that some will ask about the grain of the wood. Well, I keep my axes very sharp, I don’t use an ax every day, I don’t have to clear land, and I don’t deal with large first growth trees. I’m betting in my lifetime I’ll have no problems with thin, elegant, “springy”ax handles and if I do I’ve a spare.

Re: Tuesday Night Hand Tool Chat - Handles

#3

You might ask House Handles about theirs

Bill Houghton, Sebastopol, CA

I haven't used them yet, but House Handle Company seems to offer high quality handles; I'm sure they could give you dimensions of their handles.

I was struck by the fact that they offer octagonal handles for carpenter's hammers, something I haven't been able to find locally for ages.

Their axe handle listings: http://www.househandle.com/products.html#house