Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Removing Plastic Film????

Posts

Removing Plastic Film????

#1

Removing Plastic Film????

Barry Irby

I have a brass kick plate I have "saved" in my shed for many years. Now I want to put it on my front door. The very thin plastic film has practically bonded to the brass on about 25% of it at random. Any good ideas on removing it? Solvent? Heat Gun?

And any suggestion on polishing the brass?? then Lacquer It???

Re: Removing Plastic Film????

#2

Re: Removing Plastic Film????

Yonak

I was thinking of putting into the freezer but I thought I'd do a bit of an internet search first.

Although there were several suggested solutions, the most popular one was boiling water. Pour boiling water and peel immediately, trying not to burn your fingers.

It occurs to me that this may tend to warp the brass sheet but, after cooling down, it would most likely return to form.

Re: Removing Plastic Film????

#3

Kneale Brownson

Hair dryer