Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Gluing Ceramic tile question

Posts

Gluing Ceramic tile question

#1

Gluing Ceramic tile question

Barry Irby

Friend of mine has a ceramic tile tooth brush holder installed in the wall in his bathroom. Its broken. He has both pieces, the one that came off and the part still in the wall. Its a rental house. How would you glue it? Or would you glue it? How would you fix it?

I have epoxy and Cyno acrylate. How would you hold it in place long enough for the epoxy toe set?

Re: Gluing Ceramic tile question

#2

Re: Gluing Ceramic tile question

Mark Mandell - Gone Round In New Jersey

CA on half, accelerator on the other half. Stick and hold for 30sec.

Done.

Re: Gluing Ceramic tile question

#3

Re: Gluing Ceramic tile question

Keith Newton

I'll agree with Mark, but would like to point out that all CA is not the same.

I don't think I would use that with the thin / fast, it may kick before you find the exact alignment. I'd use the medium. You can put it on both parts, and push them together to find the alignment, then just tilt out for a quick spray of accelerator, then back together with much less risk.

Re: Gluing Ceramic tile question

#4

I vote epoxy

Dick Coers

I epoxied a ceramic spoon rest years ago. It even takes trips through the dishwasher with no ill effect.

Re: Gluing Ceramic tile question

#5

It will fail

Bill Tindall, E.Tn.

Cyanoacrylate is not a permanent adhesive. It is especially not permanent in damp environments or on surfaces that are basic, like ceramic.

I expect epoxy will work.

Re: Gluing Ceramic tile question

#6

Re: Gluing Ceramic tile question

Howard Acheson

I have used Silicone Sealant adhesive. It fills the rough surface on the substrate and provides a permanent repair.

Re: Gluing Ceramic tile question

#7

Is this the same as clear silicon caulk?

Barry Irby

I have that too.

Re: Gluing Ceramic tile question

#8

Re: Is this the same as clear silicon caulk?

edd

I,ve used E6000 craft glue with great sucess.

Edd

Re: Gluing Ceramic tile question

#9

Epoxy.....

John in NM

Its basically what they use to fill voids in stone tile, works great. Run of the mill 5 minute should be fine for what you describe. Definitely not CA glue, as Bill said, it tends to fail.