Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Hand Tool Sharpening Books

Posts

Hand Tool Sharpening Books

#1

Hand Tool Sharpening Books

David Frame

There are a number of books that help one learn to sharpen plane irons, scrapers, chisels. turning tools, carving tools, and the like. Can anyone point me to a single book that covers all of these tools with up to date sharpening equipment?

Thanks for your time,

David Frame

Re: Hand Tool Sharpening Books

#2

JL

Re: Hand Tool Sharpening Books *LINK*

JL

Complete Guide to Sharpening


Lee Valley

Re: Hand Tool Sharpening Books

#3

craigd

Re: Hand Tool Sharpening Books

craigd

I really like the Leonard Lee book mentioned in the previous post. It covers sharpening all the tools I could think of (including a chapter on each of the tools the OP mentioned) and, even though it has been out for quite a while, sharpening methods and abrasives haven't changed much. Also good if you want to know why.

I also have Ron Hock's Perfect Edge, which is also good. But I prefer the Lee book.

Re: Hand Tool Sharpening Books

#4

does that book include saws?


Re: Hand Tool Sharpening Books

#5

That book is the Bible of sharpening.


Re: Hand Tool Sharpening Books

#6

yes


Re: Hand Tool Sharpening Books

#8

Re: That book is the Bible of sharpening.

David Frame

Thanks to you all for your input. There are some things I know about sharpening, but sharpening plane irons and adjusting them are a bit out of my league.

Grateful for your time,

David Frame

Re: Hand Tool Sharpening Books

#9

Re: That book is the Bible of sharpening.

Jim Toews

David, Your comment about sharpening and adjusting planes being "out of my league" is interesting. We all start in that position. The trick is, IMHO, to sharpen a blade, put it in a plane, and start learning! As with anything in life, the deeper you get into anything the more complicated and arcane it gets, but also the easier to do. "Good enough" counts, especially at the beginning of the learning curve. I was utterly amazed the first time I really sharpened a plane blade and used it. Planes really can sing! The trick is to follow the Nike lead an "Just Do It". Oh, the Lee Valley book is a good basic book on sharpening just about any hand tool in your shop. Well worth the price.

Re: Hand Tool Sharpening Books

#10

Good article on the subject.

John Pappas

http://woodcentral.com/articles/handtools/articles_935.shtml

Re: Hand Tool Sharpening Books

#11

Re: That book is the Bible of sharpening.

David Frame

Hi Jim,

Thanks for the vote of confidence.

I've been woodworking for 42 years. Most of has been done with machinery. That's not to say I build bad furniture. On the contrary. I guarantee everything I build. There is quite a bit of hand work in my pieces.

However, there is a plus side to using hand tools. Especially the feel of freshly planed wood.

Anyway, I'll purchase the book mentioned and hopefully it will help me build more skills to my repertoire.

Thanks for your input,

David Frame

Re: Hand Tool Sharpening Books

#12

The plus is not in the feel.....

Bill Tindall, E.Tn.

If you put a typical finish on the wood you will not be able to tell if it was hand planed or sanded. That is not where the benefit of being able to use a plane lies. It is fitting. A plane is able to remove tiny increments of wood until something fits perfect. Hard to do with power tools.

My hand plane epiphany came upon visiting the College of the Redwoods, Krenov's school. I saw how the students were precisely fitting their parts by planing.

If you can get someone to mentor you, in an hour or two you will learn enough to continue on your own. The problem with learning from the internet or books is that everyone has their way of doing stuff and the conflicting opinions becomes exasperating for a beginner. The best advice I can offer is to buy a good wheel for your grinder and learn to hollow grind chisels and plane blades. It makes the rest easy.

And, learn to set the cap iron of your plane to mitigate tear-out. An article in the WoodCentral Articles and a recent Popular Woodworking will tell you how.