Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Math Problem

Posts

Math Problem

#1

Math Problem

Lester Gillett Independence Mo

I am making a Lathe Tool Holder for our club from plans in the

Woodsmith book. The sides have a V cut in the top to hold the

tools and the angle is 135 degrees. my math is not too good so

what angle would I use on my miter sled to make this cut?


Re: Math Problem

#2

45 degrees


Re: Math Problem

#3

Re: Math Problem

Lee Schierer in McKean, PA

Note on your sketch, the angle labeled to the upper right should say 45 degrees.

Lee

Re: Math Problem

#4

Re: 45 degrees

TomD

Because two 45s add up to 90, which is presumably the shape of the tool you want to support, as most are either round or square in section.

Re: Math Problem

#5

Re: 45 degrees

TomD

I'm good at the high school level geometry, but I have to admit I model a lot of stuff in CAD, very simple CAD, just a lot of lines and arcs linked together. The cool thing about CAD is all the dimensions, angles, and radii are in there. So having taken the time to make a drawing, you simultaneously have all the data.