My cousin wants to buy about 350 linear feet of 8 inch wide oak. She lives near Raleigh NC. I sent her to Wood Finder and she has found lots of green oak. So the question is how long does it take to kiln dry oak 1 x 8's properly? What about dehumidifier kilns? Anybody got a few details? Time is short for her.
If she doesn't already know exactly what to do, then she has no business buying green oak. It will end up costing her to get it dry, or she may ruin it all.
But then again, don't you have plenty of air-dried oak that you could sell her?
I did not state the question clearly enough. She has no desire to dry it herself. We just wanted to know how long a reputable company would take to dry it. She would like t have the lumber in a week and I had told her it would take longer than that to dry it. I knew it was a long kiln schedule but I thought it was more like two weeks, but I also knew I could get the right answer from Bill. Thanks.
Keith, I do have oak, and it is dry, but mine is all seven and eight feet long and she wants longer lengths.
We used wood finder, Bill or anybody know fo a better place near Raleigh, NC
I have no idea who sells hardwood lumber in that area but be assured that the market is large and hence there will be several local suppliers.
We sold lumber for many years and encountered a variety of customers. It was easy to tell the experience of the buyer by the experience they showed buying. Something doesn't add up about the request. Anybody intending to work this amount and value of lumber presumably has experience and that experience would translate into knowing where the lumber could be found. Is it possible that in fact she has little experience working hardwood lumber which is why she doesn't know how and were to buy it? If so there are potentially more problems here than the obtaining of materials.
If I found myself in this location needing the lumber I would track down some shops that work these quantities of lumber and ask where they obtained it. Others might ask the membership of a local woodworking club.
If the need is a finished 8" in long lengths that means the starting lumber will need to be at least 9-10" wide. It is not uncommon for mills to saw 8" cants then run these through a gang rip. The result is that 9-10" oak is less common to find in a 1000 bdft lot of oak that some more narrow width and depending on the mill there may be nothing wider than 7 1/2" in a pack of oak after drying.
To meet the needs of customers needing wider stock some companies put op packs of 10 and wider, or 12 and wider (for example). She may pay a premium for the widths she needs and some substantial milling waste.
If she needs 8" base board (example) for a house job she is better served to go to a place that manufactures this product. We have one here in Kingsport but they are not uncommon any place high end houses are built. Find them from high end builders or the yellow pages. Wall (sp?) Lumber north of Winston Salem can likely supply the need.
She is a talented person with lots of experience at many different things. She owns a major landscaping company doing multi-millions a year. OTOH she once built a louvered shutter for her beach house with a skilsaw. It was beautiful. But, she is reaching beyond her experience here. You hit it right on the head. Its baseboards. And they may be worth more than the house, but its what she wants. Thanks.
Buying 350 linear, it isn't as though she is re-flooring a fleet of trucks. That is a reasonable amount for anyone to buy, though in my case I prefer thicker stock for general use. First thing she should do is find a place that sells the stock dry, that way she is buying closer to the end product and can be more assured of what she is getting. As Bill points out, there are a number of ways to find wholesale pricing in the area.