Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

OT Follow up on Metal Detecting Adventure

Posts

OT Follow up on Metal Detecting Adventure

#1

OT Follow up on Metal Detecting Adventure

Barry Irby

A week or two ago I posted questions about metal detecting. I wanted to find the property pins on a house I am selling. Someone suggested a Harbor Freight model. I am skeptical of everything HF, but since this was basically a one off for me I gave it a try. Got their better unit and tried it. It was DOA. Called their support line and spent half an hour waiting only to be told they would connect me to Tech Support. After another half hour was told, "Oh yeah, we have been getting a lot of calls on those, take it back and get a different one and if that does not work take it back for a refund". Went back to the store and the only other one they had was broken in the box. Got my money back and bought one through Amazon. Came in two days and worked out of the box.

Went to the property and waved it around where I thought the pins were. Not as easy or as accurate as I hoped. I thought I could sort of do X marks the spot by going at it from two different directions. Not nearly as good as I hoped. Found the first pin in about 20 minutes. Measured back to where the second one should be and found it in about ten minutes. It was in plain view, except that it was in a brier patch. About ten more minutes got the third one. Also in site except I was confused by the "Arraingement" of the various Cable and phone boxes. Then went to find the last one, on the front corner. Took a few minutes to determine the neighbors had put the fence on the wrong side of the line. 2 1/2 feet on the wrong side. Back to the first side, it is now clear that the neighbor on that side also put their fence on the wrong side of the line. Anther thing that slowed me down was at the first pin, the neighbors driveway had crept about two feet onto my property. Not really surprising, but the gravel made digging for the pin tough. The pin is laid over at about a 45 degree angle. I'm guessing the cars did that.

The lady that lived in the house before I bought it was in a wheel chair and had some mental issues. I think its interesting that both neighbors took advantage of her. I suppose its possible it was an accident, but I wonder. The fences sure made the process harder. So did the cable lines and trash.

I realize I am unskilled and inexperienced, but the metal detector did not add nearly as much t the process as I thought it would. Now I wonder if a "pinpointer" is a necessary accessory. And Why couldn't I use one of the wands like some of us find nails in lumber with?

Re: OT Follow up on Metal Detecting Adventure

#2

Re: OT Follow up on Metal Detecting Adventure

Dave Bair

In MI, at least, it's possible to steal your neighbor's land through a process called "adverse possession". If you can fence off a portion of his land for seven(?) years, it's your's. Folks try to do it around state-owned land all the time. Best find out if your locality has the same rules and start action to remove the encroachment if it does.

Re: OT Follow up on Metal Detecting Adventure

#3

Re: OT Follow up on Metal Detecting Adventure

Barry Irby

Virginia does have Adverse Possession laws. Unfortunately I have had to familiarize my self with them on another piece of land I own. the laws are more complex than it seems at first and the courts generally frown on them, making the person trying to work the adverse possession live up to all of them fully.

I think in this case we should turn it around and say, "thank you for the free fence".

Re: OT Follow up on Metal Detecting Adventure

#4

Re: OT Follow up on Metal Detecting Adventure *LINK*

Henry Higginbotham

Barry, you're absolutely on the right track regarding the difficulty of acquiring land by adverse possession. I'm in Alabama, so I don't really know that much about the law where you are (Virginia?), but it's probably not all that different in most respects. I have a book on Alabama law as it pertains to land surveying and boundaries, and almost a quarter of the 800+ pages is devoted to the single chapter on adverse possession. I've read most of it over the years. For sure, it's not the simple thing most people seem to think it is.

Regarding metal detectors, one of the more common names you'll find in a surveyor's truck is Schonstedt. These certainly aren't HF cheap, but they work, especially in the hands of an experienced user (which I'm not--I'm mostly an office guy). They ignore nonferrous metals and have a directionality about them that causes the squealing to vary in telling ways.


Schonstedt

Re: OT Follow up on Metal Detecting Adventure

#5

Re: OT Follow up on Metal Detecting Adventure

Keith Newton

Good to hear your report Barry. How much did the Amazon detector cost, and how far away will it pick up a buried pin?

I have been freshening up the survey lines on some timber land, and couldn't find a couple of corners. I don't think it is crucial for my purpose of flagging it for the logging crew since I could find blazed trees to reinforce my compass reading.

One of my cousin neighbors had recently hired a survey crew to mark about 1/2 mile of our common property line. They had to dig down about a foot to find one of those corners, so I'm sure I would never have found that one, especially since it was in the center of the path of the storm that buried the surveyed line just one week after they finished marking it.

As for your question about the shop-grade detectors, I have a Woodwizard III that I use in the shop, and out on the mill. It is only strong enough to pick up a nail from about 3", so wouldn't be much help for your needs.

How close, or far away will your detector pick up? I would like to have something stronger for the sawmill, since I am partial to harvesting big urban or home-place trees. I hit two in my last tree on the mill. I think I must be paying for all those tree-houses I built in my youth. ha,,,, Back when I was a freshman in college, I recall sitting around the dorm talking with friends when the subject of tree houses came up. I started counting back, and it was equal to my age at that time, which I guess was ~ 18. ha

Are there any gurus here? I was wondering if my karma would be based on the number of tree houses built, or the number of nails driven into trees? Aaaarg!

Re: OT Follow up on Metal Detecting Adventure

#6

Re: OT Follow up on Metal Detecting Adventure

Barry Irby

Keith, I really don't know what the range of this thing is. I paid about $71 (including shipping) for it on Amazon and it a Gold Digger I think. I really had fairly low expectations since I thought a good one would cost five to ten times that much. I found it to be a little erratic. Sometimes I would get a strong signal And sometimes very little. since I was hunting for a iron pin half inch in diameter and over a foot long I thought it was going to be easy. Now I am wondering if the fact that the pins are vertical has an effect? You have to swing the detector, it must be in motion to pick up the metal. The fact it has to be swinging makes it difficult to watch the meter and the head at the same time. That's why I was wondering about the pinpointer or the one you have. Wish I could borrow one to play with it.

The one mentioned above costs over $700 and is designed for ferrous metals only.

It would be interesting to try it on a log.

Re: OT Follow up on Metal Detecting Adventure

#7

Allan W

Re: OT Follow up on Metal Detecting Adventure

Allan W

I have used one trying to locate the corner stakes in our churches cemetery when marking out burial plots. The one we have you are able to set how strong the detector is. I have found that if the stake is 3 to 6 inches down, it can be difficult to locate it exactly even on the strongest setting. We can usually get close and then use a metal rod to poke around to locate the stake.