Need scroll saw help
Bill Tindall, E.Tn.
Granddaughter is visiting next week. I remember enjoying scroll sawing when I was her age, but don't recall what I made. Does anyone have some ideas of what we could make?
Knowledge You Can Build On — Est. 1998
Need scroll saw help
Bill Tindall, E.Tn.
Granddaughter is visiting next week. I remember enjoying scroll sawing when I was her age, but don't recall what I made. Does anyone have some ideas of what we could make?
Re: Need scroll saw help
Paul Cates - Henderson, KY
I have never used a scroll saw but a friend of mine used one to saw my first name out of a piece of wood thick enough to stand on a shelf. I always thought that was neat.
Re: Need scroll saw help
Bill Howatt
Hopefully your scroll-saw will have a high-resolution touch-screen, WIFI enabled with internet access along with front and back cameras.
What about finding some cartoon character or simple animal/bird clip-art that would be suitable. Of course, there are the stars and triangles. I don't believe you mentioned the age but I think it is best you don't do what a lot of "experts" do and that is overwhelm the young person with things you think are simple but end up frustrating the youngster.
My opening sentence was intended to be humorous but years ago I worked with a Cub master. He was collecting up toilet paper tubes, wire etc at work. He said the Cub project was a crystal set and he fondly remembered his days playing with one. Next day, I asked how it went. He said it was poor - the current kids were used to playing with CB walkie-talkies and the crystal radio was rather lame.
Bill
Re: Need scroll saw help
AZ in Colorado Springs
How about animal silhouettes? Rabbits, dogs, cats, etc. Be sure to draw them onto the stock. It's very difficult to just cut it freehand and get looking even remotely as you intended.
How old is she?
Seven
Bill Tindall, E.Tn.
She has worked with me in the shop since about age 5. I will put her to work sanding her sisters chest of drawers this trip. Would also like to do some scroll saw work which I think she can do of the pattern is not like fret work.
Re: Need scroll saw help
Hank Knight
Bill,
When I was 8 or 10 years old, I was interested in birds. I would trace the outline of common birds from my World Book encyclopedia onto some 1/4" plywood, and my daddy would let me cut them out on his Shop Smith scroll saw. I would then paint them to replicate, as closely as I could, the plumage of the bird I had traced. I made many of them. That was my intro to woodworking.
Hank
Re: Need scroll saw help
Allan W
I have made puzzles using 1/8 inch Baltic birch plywood. Print out an 8 x 10 picture that you or she find interesting and glue it on to the plywood leaving about a 1/4 to 1/2 inch of the plywood visible around the edge. I used 3M's spray glue so the picture doesn't buckle. Then you can spray the picture with a light coat of clear. Figure out how many pieces you want and then put pencil marks on the edges to indicate the rows and columns. Then free hand cut out the puzzle pieces.
I have made a number of these for friends for their grandchildren.
Re: Need scroll saw help
terry quiram
Christmas ornaments. Cherry or Maple 1/4 or thinner material. Attach pattern with 3M spray mount. Want me to scan some and email to you?
yes
Bill Tindall, E.Tn.
Want me to scan some and email to you?
Excellent project. Please do.
Re: Need scroll saw help
Ron in Sterling, CT
Hi Bill,
My dad bought me a jig saw (that's what scroll saws were called when I was a kid) when I was 9. I spent many hours cutting out everything with it. Today I still do a lot of Intarsia work using a scroll saw.
Start your granddaughter out on simple projects like birds and animals cut from 1/4 inch plywood. Copy a pattern, then adhere it to the plywood. I use rubber cement instead of the 3M adhesive, but either one will do. She can then either paint them, or color them, or whatever suits her fancy.
Good luck and let us know the outcome.
Ron
Re: Need scroll saw help
Janice Manuel
I have a bunch of simple patterns here...remind me what your e-mail address is and I can send enough to keep you busy...
How's your supply of good blades?
Re: Need scroll saw help
Don Evans
I would think it important to use KISS as a 7 year old has an attention think going and a lot of adults do also.
If each item is simple and doesn't take too long, especially the first 2 or 3 you could hook her with the excitement of accomplishment.
First I would use 1/8" no more than 1/4" thick material. Just draw so straight lines on it maybe 2 each line should have a hook on one end. This simple exercise teaches 1. following the line 2. turning the item in the blade 3 how to get the blade back out of the work.
then to add some excitement (for her) make some curving lines like a couple of joined letter S. etc.
Things that an adult may take for granted are new and help hold interest.
The second session I would stick to simple ornaments for xmas tree.
One I am thinking about is a xmas tree.
Have fun!
Don
Re: Need scroll saw help
Larry Clinton At Frankfort, (Central) Indiana
A few years ago (about 55), my BIL was a Cub Scout leader, I think they were ages 6 to 10 or so. He needed a project for them and a local cabinet shop donated a pile of scrap 1/4" birch plywood cutoffs. I used my scroll saw to cut out many lawn / garden ornaments, Ducks, rabbits and other small animals. At that time I used carbon paper to trace the eyes, ears and other features, and the scouts painted the items using the outlines. Then they nailed a 1/4" x 2" pointed stake to the back to drive into the ground and hold them upright. You could have her cut out similar figures (internet is full of free patterns) and either use them as above or leave the stake off and hang them on the wall of her room.