Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

moving tools (sorta long)

Posts

moving tools (sorta long)

#1

moving tools (sorta long)

Dan

It looks like I'm going to be relocating by the end of the month. Sold our house, but still haven't found a new one.

Have an early-to-mid 90s era Craftsman contractor table saw that will be one of the challenges. I'm guessing that removing the side tables will be a smart idea to lighten it and prevent them from being used as handles. Any other suggestions for moving this one?

the other challenge will be the ridgid 6" jointer. (BTW, anyone know what one weighs?) It's on a harbor freight mobile base "kit" (they supplied corners and wheels, I supplied the parts to connect the corners). I think the jointer is a little too heavy because it kind of has a mind of it's own when rolling it, which won't be fun trying to roll it up a ramp to a truck. Got a coupon from Rockler today with the HTC 1000 portamate mobile base on sale. Info says it's rated for 400 lbs. think that will work for the Ridgid 6"? Anyone used one with this tool or similar? If not, what are you suggestions for moving the jointer? What are the best lift points? I'm guessing NOT at the ends of the tables.

Thanks for any advice/info you can provide. I'm not looking forward to it, particularly since it's looking like I'm going to have to move it twice (current location to storage and eventually to new place).

DB

Re: moving tools (sorta long)

#2

Re: moving tools (sorta long)

John Lucas

Build yourself a 4 wheel dolly. I've used mine many many times to move things in and out of houses and apartments. The jointer can easily be lifted by 2 people to set it on the dolly. Lifting by the ends shouldn't be a problem if you do it gently. However you could also put some 2x4'x under it from the sides and lift it closer to the center and put it on the dolly. Then set it off when you get it in the truck.

Same with the table saw although I will second the issue of removing the side tables as well as the fence and guides. I moved a Grizzly Cabinet saw with just 2 of us. We couldn't lift it by we tilted it, shoved the dolly underneath and then shifted it more centered on the dolly once we had it on it.

You could do the same tilting manuever to load the jointer on the dolly. If you do build a dolly use fairly large wheels and ideally some that aren't really stiff. The really hard rubber ones just won't roll over anything. I used pneumatic wheels for my lathe dolly but they are too big for most other tools. They did roll over a gravel driveway and I'm sure the wheels on my other dolly would not.

Re: moving tools (sorta long)

#3

Re: moving tools (sorta long)

Dick Coers

I use refrigerator dollies a lot. Moved a MM16 bandsaw on one, weighed over 600 pounds. You could go from the front or back, and not touch the tables on your jointer.

Re: moving tools (sorta long)

#4

Re: moving tools (sorta long)

james runchey

Just moved my workshop tools Saturday to our new, very small house. Not a new house, just a small 1200 sq ft 50's ranch. I'm allotted half the small , very small,two car garage. Anyhow, to the moving, My son rented a truck and came up to the farm on Friday and we loaded up for the two and a half hour trip. I have a dolly which simplified the procedure. We loaded the table saw on the dolly and rolled up the ramp with no problem. I put a board on the dolly to bridge the legs. The bandsaw we just leaned against the truck and hoisted by hand. My old, bought in '59 Shopsmith just rolled up the ramp as did the router table. I didn't take the old radial arm saw, I'll try and sell that before we close on the farm. I also have a dust collector made from plans in Wood magazine that I have no room for in the new house. I had planned to haul it on the truck and sell it at our new location, a Chicago suburb, but we were filled up on truck space and didn't have room. I'm really going to miss that dust collector, it's been a joy from day one. I probably won't be able to sell it out in the country, so maybe I'll just remove the motor unit and bring that and the Long Ranger remote and sell those on Craigs list.

I'm very sad leaving the farm, but at 81 I guess it's time to move on. Gonna really miss the big workshop, 24 x 24', as well as the house twice the size of the new one.

Re: moving tools (sorta long)

#5

Re: moving tools (sorta long)

Joseph J Mulherin, sr

Dan, I am suggesting you go to Harbor Freight and buy the auto moving dollys(1500lb capacity)$49.99 for two. they will assist you in moving the heavier tools.

Re: moving tools (sorta long)

#6

Lots of Archimedes involved

Rod Peterson—Ormond Beach, FL

I've moved my shop full of tools more than once. Some of the movement involved an actual physical relocation to a new shop, some involved moving them into storage and then into the new shop, some involved placing after delivery to the shop door. I've also moved our household goods a few times.

Most of the success stories involve leverage as opposed to brute force. There were a few times when brute force was all that was available (my Delta DC-380 15" planer, for example), but those only served to reinforce the notion that a "lever long enough" was a big help. Tilting, levering, shifting, rolling, are all techniques—alone or combined—that will facilitate an easier task.

One thing to watch for—those mobile bases you describe (their corners/wheels—your connecting pieces) have a "feature" to watch out for—they have three points of contact with the floor—great for stability on uneven floors, but, that third wheel, the one you lever up and down to position or move the tool, needs its own ramp to load into a trailer/truck.

I use two 10' 2×10s for ramps and have run across this problem several times. Since I never bought a third 2×10, I've had to resort to some additional shoving to get the tool up the ramp. It's not elegant, and if you have much more than a 1½% slope to your ramp, it's hard work. But forewarned is forearmed, so don't be surprised as you're casually rolling that first tool up the ramp to find yourself hitting a reef all of a sudden.

Oh, and angling the tool doesn't work. DAMHIKT.

Rod

Re: moving tools (sorta long)

#7

Re: moving tools (sorta long)

Dave Bair

You might consider renting a powered lift gate truck; roll it onto the gate, activate the lift, and roll into the truck. No ramps, no heavy lifting.

Re: moving tools (sorta long)

#8

Re: moving tools (sorta long)

Jerry Gibbs

You might consider removing the motor on the saw if weight is a problem. This is an excellent opportunity to clean out and tune up the saw. Jerry

Re: moving tools (sorta long)

#9

Re: moving tools (sorta long)

Dan

All good advice. Thanks! DB

Re: moving tools (sorta long)

#10

Re: moving tools (sorta long)

TomD

Those are mostly pretty small tools, I would think you could roll the jointer up to the truck, then just slide the head off the base, to minimize lifting.