Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Oval wooden dowel rods

Posts

Oval wooden dowel rods

#1

Oval wooden dowel rods

Paul Woolson

Hi all,

I'm looking for some (1-1/4″ x 1-5/8″) oval dowels in probably maple. Google has turned up nothing. Does anyone here have any experience with these or know where they can be purchased? Thanks! Paul

Re: Oval wooden dowel rods

#2

most dowel rods at Menards are oval

Dick Coers

but not that size. I make a lot of my dowels on the router table with 4 passes on a bit. I don't know how long you need, but if you leave the ends square, it works very well.

Re: Oval wooden dowel rods

#3

Re: Oval wooden dowel rods

Ralph Lipeles

If you have a wood lathe you could turn the dowels then move the centers to create somewhat of an oval. Or you could just start with a round dowel and use a hand plane or block plane to do the roughing and then hand sand with sandpaper backed by a block of hard rubber.