Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

ipe oil

Posts

ipe oil

#1

ipe oil

mcnerney

Does anyone know what kind of oil is used in "ipe oil"

I'm guessing too it must be fairly thinned out

Mike

Re: ipe oil

#2

Clint Searl

Re: ipe oil

Clint Searl

Probably just BLO and solvent. (The same as "teak" oil)

Re: ipe oil

#3

Ellis Walentine

I'd like to find out

Ellis Walentine

I used Cabot's Australian Timber Oil on our ipe porch a couple years ago and learned a few things. First, it is essentially an oil/varnish mix (linseed oil/alkyd varnish) with some pigment stain and 2lb. of VOC per gallon. My hunch is that the "ipe oil" you're referring to is similar. Here's what I suggest: Before you use either of these products (or anything else) on ipe, prepare a few wood samples and experiment a bit with the penetration and film thickness. I found with the Timber Oil that you can't leave this stuff on the wood to dry, because it doesn't dry. You need to thin it, apply it, and then wipe it off, like you would with "Danish Oil" finish. The important thing is to not let it sit on the wood.

I haven't tried this product, though, and maybe it's totally different, so let us know what you find.

Ellis