Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Thor 3/4 hand drill

Posts

Thor 3/4 hand drill

#1

Thor 3/4 hand drill

Ronald G. Martin

Just bought a dandy thor 3/4 inch hand drill it has a jacobs #36 chuck,the size is V F H,model # 5521 and the serial # is 995140 , any information would be helpful.If it runs it will be a keeper just for the heft of the drill.If it does not run will it be worth the price to rebuild,the drill turns by hand not froze up and does not smell like it was fried,a new power cable and wire to the switch and see if it runs.

Re: Thor 3/4 hand drill

#2

Re: Thor 3/4 hand drill

Ralph Lipeles

Here's some history I found on THOR.

Thor Power Tool Co.

Aurora, IL, U.S.A.

Manufacturer Class: Wood Working Machinery

HistoryProductsMachine Info Publication Reprints (2) Photo Index (9) Machine Registry (0) Images (5) Patents (95) Classified Ads (0)

History

Last Modified: Sep 12 2011 5:51PM by Jeff_Joslin

If you have information to add to this entry, please contact the Site Historian.

This business was founded in 1893, as the Independent Pneumatic Tool Co., by John D. Hurley, John Hopkins (then the mayor of Chicago), and Roger Sullivan (a politician). The following year Hurley's brother, Neil C. Hurley, Sr., was appointed to the board to directors. Early products included a pneumatic riveting hammer, bicycles, and motorcycles. A separate company owned by members of the Hurley family, Hurley Machine Co., produced a washing machine that also used the Thor name and logo.

In 1953 the Independent Pneumatic Co. name was dropped in favor of Thor Power Tool Co. The same Thor logo remained in use. Speedway Manufacturing Co. was acquired in 1954 and incorporated its name and brands into the Thor family.

Thor was best known for their handheld power tools, which are outside the scope of this website. They qualify for listing here because they made at least one stationary machine, namely a bench grinder that was sold through Montgomery Ward Co. At least some such grinders bore the Speedway label; Speedway Manufacturing Co. of Cicero, IL and La Grange Park, IL. Speedway Mfg Co was a division of Thor Power Tools.

In August 1964, Stewart-Warner Corp. announced that they were acquiring Thor Power Tool Corp. and merging the two businesses, Shortly afterwards, Stewart-Warner claimed that Thor had overstated its assets and understated its liabilities, and the purchase agreement was rescinded. Stewart-Warner continued an advisory relationship with Thor, and in December of 1964 a Stewart-Warner employee assumed the presidency of Thor Power Tool Co. Over the next few years, Stewart-Warner continued to purchase more shares in Thor, and it appears that the "Thor Power Tool Co." was supplanted by "Stewart-Warner Corp." by 1988; by that time they were no longer selling bench grinders or handheld power tools.

Re: Thor 3/4 hand drill

#3

Re: Thor 3/4 hand drill *LINK*

Bill Houghton, Sebastopol, CA

I have a 1/4" Thor drill motor from my uncle - the opposite end of the size spectrum. It's a great little tool.

You might wander over to Old Woodworking Machinery with this post; there are a lot of folks there knowledgeable about old powered tools. Link below.


http://owwm.org

Re: Thor 3/4 hand drill

#4

Got the bases covered

Larry Barrett

I have a Thor 1/2", passed down from my Dad.

Re: Thor 3/4 hand drill

#5

Re: Thor 3/4 hand drill

Larry Clinton At Frankfort, (Central) Indiana

In my opinion Thor made some excellent tools ~ back in the 1950's I had a need for a 7 1/4" circular saw. I purchased a Thor at a shopping center in Northern Indiana, it was a fairly inexpensive tool at the time with an advertised "burnout proof" armature. I completed many projects with the saw, actually used it to build a house, and was using it through the 1990's as a contractor. The trigger switch finally gave out when the saw was about 40 - 45 years old! By today's standards it was rather heavy and cumbersome, but doubt any but today's Industrial Models would come close to its service life.

Re: Thor 3/4 hand drill

#6

Re: Thor 3/4 hand drill

Howard Norman

The first power that I purchased in 1955 was a 1/4" Thor drill. I still have it and it still works now awaiting the installation of a new power cord.