Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Samantha's Dresser 13- finish on drawers

Posts

Samantha's Dresser 13- finish on drawers

#1

Samantha's Dresser 13- finish on drawers

Bill Tindall, E.Tn.


Stain is 10% burnt umber Japan pigment, 10% linseed oil and 80% neutral General Finishes stain base.

The problem with crotch is that it can go almost black with oil or stain. There are two says to avoid undue darkening- wash coat or dilute stain and oil. In this case I diddled with stain formula until I got a depth I liked.

Finish is Sherwin Williams "water white" conversion varnish. I wanted a close to the wood look. To get it I diluted the finish 50/50 with xylene so that the build would be thin. It turned out the way I intended.

Spray conditions were ideal today and the coating is glass smooth.

Re: Samantha's Dresser 13- finish on drawers

#2

Re: Samantha's Dresser 13- finish on drawers

Mark Mandell - Gone Round In New Jersey

Very Nice Bill. Sam's a lucky girl.

Re: Samantha's Dresser 13- finish on drawers

#3

Very Impressive Indeed!


Re: Samantha's Dresser 13- finish on drawers

#4

Ellis Walentine

Really nice

Ellis Walentine

How long did you let the stain dry before you sprayed the conversion varnish?

Re: Samantha's Dresser 13- finish on drawers

#5

Re: Samantha's Dresser 13- finish on drawers

C. John Hebert

Nice looking work Bill!!!!!!!!!!

Re: Samantha's Dresser 13- finish on drawers

#7

more on finishing figure

Bill Tindall, E.Tn.

I am not crazy about shiny finishes. But, dull finishes subdue figure in wood and I wanted the figure in this crotch wood to be at its best. A compromise is to pick a finish where the film forming polymer of the finish is the right luster. There is a varnish I like to use but without some dulling it reflects like glass. The S&W conversion varnish has a luster that would work for this application.

A second way to keep the figure bright, but not too bright, is to apply the finish so that it has a "close to the wood" look, like rubbed oil. This look is accomplished by spraying 2 thinned coats of finish. The thinned finish does not build to a heavy looking coating, yet it is there to protect the wood and provide a reflective surface.

Re: Samantha's Dresser 13- finish on drawers

#8

Re: Samantha's Dresser 13- finish on drawers

Ron in Sterling, CT

Great job Bill. Thanks for all the posts and valuable info as you went through the build.

Ron

Re: Samantha's Dresser 13- finish on drawers

#9

Re: Samantha's Dresser 13- finish on drawers

Joe in a Cleveland suburb

Fantastic work on this piece.

Thanks for sharing its progress along the way.