Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Questions on Drying wood, Kilns/steam

Posts

Questions on Drying wood, Kilns/steam

#1

Questions on Drying wood, Kilns/steam

Barry Irby

Les' questions below about his wood cupping when he resawed it got me to wondering:

I know little about kiln drying wood in terms of the actually timing and temperatures, and the business of steaming ti to relieve the stresses and apparently to even out the color of walnut.

If I air dry wood it seems to take months or a year to dry one inch stock. In a kiln this can be accomplished in a few days(?). If they apply steam in the kiln do they have to start over and dry it from the wet state for a few more days? If I steamed a piece of wood to relieve the stresses or perhaps to bend it would I have to wait another year for it to dry again?

I guessing the steam does not wet the wood all the way through and mainly heats it. Only the out surface and perhaps a few millimeters of it are wet.

OTOH, if the steam does not wet the wood, how does it even out the walnut all the way through?

Re: Questions on Drying wood, Kilns/steam

#2

go to the Articles, "Where Hardwood Lumber Comes F

Bill Tindall, E.Tn.

look up my series on hardwood lumber porduction, "Where Hardwood Lumber Comes From". Specifically, read the Article on steaming walnut and KD lumber. If you still have questions repost them.