Another Eye glass question
Barry Irby
Anyone tried using any of the coating they sell for windshields like Rain-X to make it easy to clean off the shop crud?
Knowledge You Can Build On — Est. 1998
Another Eye glass question
Barry Irby
Anyone tried using any of the coating they sell for windshields like Rain-X to make it easy to clean off the shop crud?
Re: Another Eye glass question
Lee Schierer in McKean, PA
I would be careful using Rain X on plastic lenses. According to the application instructions:
"Avoid using Rain‑X® Original Glass Treatment on plastic shower doors, glass shower doors with etching or frosting, plexiglass and fiber glass
Avoid using Rain‑X® Original Glass Treatment on any plastic surfaces, including motorcycle windshields, ATVs and solar panels"
Eyeglass lens plastic is similar to these.
I use this on my *LINK*
terry quiram
[/b
motorcycle windshield and helmet face shield.
Plastic cleaner
Here's what I use
Lee Schierer in McKean, PA
I use Zeiss lens cleaner
I squirt some on each lens on each side, swish it around with my finger and rinse it off under the tap.
Lee
Re: Another Eye glass question
Uncle Jess
I use 50 percent rubbing alcohol and 50 per cent distilled water. Spritz it on a microfiber cloth and wipe your glasses clean. Works well for pc and phone screens, too.
Be careful
Lee Schierer in McKean, PA
Alcohol and some plastics such as acrylics don't play well together.
Lee
Re: Here's what I use
John in NM
I just go with plain dish soap and a bit of hot water. Clean cloth for drying is probably more important than the soap.
It's annoying to get dust on glasses and have to constantly wash them, but not so annoying as getting dust under a contact lens 