Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

What screws for Green Lumber?

Posts

What screws for Green Lumber?

#1

Bart Goldberg

What screws for Green Lumber?

Bart Goldberg

I'm building some outdoor planters from green (18% moisture) lumber (Black Locust). I'm planning to use pocket hole screws to construct them. If the wood were dry, I've normally use fine thread screws, but am thinking that for this green lumber, I've be better served by coarse thread screws instead. Anyone got an opinion?

Thanks

Bart

Re: What screws for Green Lumber?

#2

Re: What screws for Green Lumber?

Barry Irby

Do they make Pocket hole screws that are corrosion resistant/proof?

I would be more concerned about them rusting out than the threads.

Also, working the black locust green is a good idea. When dry it about as hard as woodpecker's lips.

Re: What screws for Green Lumber?

#3

Re: What screws for Green Lumber?

John Veerkamp

The gold coated screws from Hillman or Fastenall will work just fine and resist corrosion. Coarse thread it what you'll probably find.

Re: What screws for Green Lumber?

#4

Bart Goldberg

Re: What screws for Green Lumber?

Bart Goldberg

Yeah, they sell both Blue-Cote corrosion resistant as well as Stainless steel pocket hole screws, but as it turns out, only coarse thread are offered in corrosion resistant versions.

I have used Black Locust for other outdoor projects before and it holds up to the weather really well, and yes, once dry, its very hard stuff.

Bart

Re: What screws for Green Lumber?

#5

Ellis Walentine

I'd use stainless

Ellis Walentine

I like the Robertson-drive stainless screws for this sort of job. I get them at the yard where they sell the ipe decking. Anything coated will eventually rust. Also, there's no particular advantage to fine pitch screws. If anything, they are inferior because they have so little wood between the threads. Without any facts and figures to back this up, I suspect that teeper pitches actually have more pullout resistance because they don't mince the wood so badly.

My 2¢,

Ellis

Re: What screws for Green Lumber?

#6

Jesper, Denmark

Re: What screws for Green Lumber?

Jesper, Denmark

When screwing into Black Locust, make sure you lubricate the screws. A little pot with linseed oil is good.

If you do not, there is a risk that you break long screws, and if not lubricated with something durable, you will never be able to un-screw them later.

Re: What screws for Green Lumber?

#7

nomenclature question

Jerry Gibbs

What is "green" lumber?. My understanding is that framing lumber can be sold with moisture content of 15-18%. If so, your question applies to all construction lumber that is not measured for moisture content. I would apply "green" to freshly cut wood that has not been dried by any means. Jerry

Re: What screws for Green Lumber?

#8

Ditto


Re: What screws for Green Lumber?

#9

Re: What screws for Green Lumber?

Howard Acheson

I thing there may be some confusion here. The way I read the OP's question is that he is referring to "green" as to freshly cut and being highly wet. Some of the responses seem to be referring to chemically treated rot resistant lumber. I may be wrong.

If the question is about the proper screw for freshly cut wood, then any stand steel fastener can be used. I would probably used a galvanized screw if I was concerned about rusting. Stainless steel screws and not needed.

Re: What screws for Green Lumber?

#10

Bart Goldberg

Re: nomenclature question

Bart Goldberg

As I stated in my original post -the wood is 18% moisture - so not sure why there is confusion on nomenclature.

Re: What screws for Green Lumber?

#11

Bart Goldberg

Re: What screws for Green Lumber?

Bart Goldberg

This is not chemically treated (aka Pressure Treated) lumber - its just Black Locust I bought from my local Sawyer.

Re: What screws for Green Lumber?

#12

Bart Goldberg

Re: Ditto

Bart Goldberg

Well, if both Mark and Ellis suggest SS, then I will not ignore such good advice! Thanks to all who responded.

Regards

Bart

Re: What screws for Green Lumber?

#13

Re: What screws for Green Lumber?

Howard Acheson

>>>> This is not chemically treated (aka Pressure Treated) lumber - its just Black Locust I bought from my local Sawyer.

That's what I thought. Some responses went down another path.

There is no need for special coated fasteners. Use the same fasteners you normally would. Except, galvanized fasteners would be a better choice for an outdoor application. You could use stainless steel but they are expensive.