Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Orphan Drill Press . . .

Posts

Orphan Drill Press . . .

#1

Orphan Drill Press . . .

steve mackay

The brother in law told me to come get it or it was going on the curb. It was his Grandfather's. I figured it deserved a better fate than scrap. Wasn't really neglected but was full of fifty-some years of gunk & yuk. Gave the motor a new pant job and switch but left the enamel on the castings alone. Tore it all down, cleaned, lubed and couldn't help but shine some here and there. Works great again and looks pretty snappy. From "orphan child" back to a contributing member of society. :D


Re: Orphan Drill Press . . .

#2

Re: Orphan Drill Press . . .

Gary Smyth

Unless your BIL is moving into an apartment I don't see why he would dump that machine. What you did to get it up to snuff is good, but I'm thinking that that was a good machine from the start. And, if not destined to be on a bench you got the stand too. Send him a case of his favorite beverage. That is a very nice light to medium duty machine. Congrats.

Re: Orphan Drill Press . . .

#3

Hermano!

Mark Mandell - Gone Round In New Jersey

Sitting in the back of my FIL's garage was an old Bridgewood 12" benchtop DP. He left it [and other stuff] to me in his will but told me ahead of time that he had gotten it from a friend and it was poor as it didn't have much power. Since I have an 18" floor DP, I brought it home to see if it could be salvaged. First thing I found was that it was being run with the motor forward so not surprised it had no torque. Cleaned off the rust and grub and set the belt tension and . .

Good as New!

My son now has a shiny "new" drill press in his garage along with an ammo box full of drill bits ranging from 1/8 up to 1"