Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

*** SURVEY: THE IDES OF MAY ***

Posts

*** SURVEY: THE IDES OF MAY ***

#1

Ellis Walentine

*** SURVEY: THE IDES OF MAY ***

Ellis Walentine

WoodCentral veterans know that every two months I pose a pithy question to plumb the depths of this community's collective wisdom and experience on issues of relevance if not importance to woodworkers. We stir your replies into a rich stew, mercilessly edited, that appears magically in the next issue of Woodworker West, the venerable West-Coast journal of woodworking primarily in the West, which is why a lot of our Eastern pals aren't familiar with it.

This month, I've decided to take on a topic dear to my heart -- I'll call it the "Zone" -- that I was recently reminded of by my friend Peter Korn's new book Why We Make Things And Why It Matters, though the Zone per se is not the central theme of Peter's book. I'd characterize the Zone as that coveted state of almost suspended animation, when all your cylinders are firing, when the world around you becomes just a blurry background, and you're so immersed in your work that hours slip away and your woodworking efficiency and enjoyment are at their peak. Whatever your motivations or expectations might have been, when you're in the Zone, the work is all that you are aware of. Those of you who have been around this block know what I'm talking about.

Speaking from my personal experience, I found, probably 40 years ago, that this Zone isn't something you just flip on and off like a switch, but rather more like some kind of reaction that depends on a critical mass of involvement, which only develops, for me at least, after a certain amount of time and immersion in your work, sometimes several hours. It's difficult to reach this critical mass when your shop sessions are brief or intermittent, or when your brain is overloaded with competing thoughts and concerns. But, when you get there -- cue the eerie music -- it's like pure woodworking bliss. I suspect that a lot of woodworkers, whether or not they're conscious of this flow, are addicted to it.

So, tell me what you think. Have you been there? Did you have any tricks to get there? Did you experience it in terms like I described, or how did/does it differ for you? Is it an illusion or do you really work as efficiently as it seems?

Sorry for the nosebleed. I'll look forward to your replies.

Ellis

Re: *** SURVEY: THE IDES OF MAY ***

#2

Re: *** SURVEY: THE IDES OF MAY ***

Thomas Skaggs, Foothills of Mount Level

Or as I call it..."Zen Woodworking". When it happens for me the sun is up, the coffee tastes perfect and the music on the shop stereo has got my feet tapping.

T.

Re: *** SURVEY: THE IDES OF MAY ***

#3

Alan Young

In the Zone

Alan Young

I've hit "The Zone" a few times and it is a romantic exciting place. Most of my friends think I'm always in the Zone just because I have a shop and pieces in the queue. But just being in the shop " away" from the world so to speak is no guarantee of finding the zone. You are very right when you mention the time it takes to get there- I'd say it's usually a Saturday for me-The day job is totally off my mind, I have the whole day to be in the shop-should I choose to be- ie not required to be some place at 1pm so I have the morning to work than again in the late afternoon....anything that suggests putting borders on me keeps me out of the zone. As a semi-professional woodworker I have to balance my commissions with honey-do pieces and maintenance on our 100 + year old house-I enjoy working on all of these areas but finding myself in the zone has become a less frequent occurrence as I try to push pieces through the shop for clients and still maintain a communicative existence with family. I am fining my in-the-zone- time occurs most frequently on pieces I am building for family members or close friends-I mean "really" close...Where I have full control over design and artistic direction but still have an emotional connection to the piece....So that really narrows down the "Zone Time" .. But when it happens it's like watching a Dude Catch a big wave on a Surfboard. You can't orchestrate it but you have to be in the right place at the right time.

Re: *** SURVEY: THE IDES OF MAY ***

#4

Rarely

Mark Mandell - Gone Round In New Jersey

in regard to woodworking. Reason being that much of what I do with wood is reinterpretation or derivative of prior work. The few times "it" has occurred in the woodshop were when I was working on a new design solution. It was in those rare times when one must withdraw from outside influences, and search for an answer "within", when the focus is on the paper and pencil, the wood, and an internal communication with the idea as an entity unto itself.

It is through the Zone that lays the door to the full visualization of the piece in both its detail and its gestalt. That is when working with wood has gotten me the closest to actually doing what I did in sculpture which required total immersion in the idea and the physical object in order to bring it to completion.

It is, in a very real sense, a "mind trip" (without chemical assistance) and can be exhausting and energizing at the same time. In those times one is tempted to look around for Mr. Serling to acknowledge that

"You unlock this door with the key of imagination. Beyond it is another dimension: a dimension of sound, a dimension of sight, a dimension of mind. You’re moving into a land of both shadow and substance, of things and ideas."

Re: *** SURVEY: THE IDES OF MAY ***

#5

Re: In the Zone

Barry Irby

I occasionally get into the Zone. Somehow it is vaguely like sleep. Sleep is one of life's great pleasures but is a rare form of pleasure that can only be enjoyed after it has occurred. Eating can be another of the great pleasures, but it can be anticipated, prepared for by cooking, enjoyed during the moment and then afterward. While we may anticipate sleep, most of us are not aware of the pleasure during the sleep, only afterward. I used to tell my kids that sleeping in the car was like time travel. Doze off here and when you wake up, you are somewhere else. Wood working in the Zone can be similar. Time passes, you wake up, progress has been made, sometimes to your own amazement, and reality returns.

Re: *** SURVEY: THE IDES OF MAY ***

#6

Adam of Oakland

Re: In the Zone

Adam of Oakland

cool topic - I find i get into what i'd call a preconscious state of mind, almost like the zone, when I'm doing a step that tends to be rote, or repetitive (sawing dovetails, chopping a series of mortices, etc). So I'm not sure if this is really the "zone", but I am checked out for a while when it happens...

I usually snap out of it with a sense of delight, and depending on the time of day, ready to call my local taqueria for an al-pastor burrito. oh so good.

Re: *** SURVEY: THE IDES OF MAY ***

#7

Also rarely...

John in NM

Though it has happened, I can scarcely recollect it. I've heard that there are two kinds of thinkers - visual and literal (or verbal) and a continuum between them. I would also say there are emotional thinkers (and since my wife doesn't read this forum, I can say she is the latter :D )

I tend to be more visual than anything else. I can remember vividly exactly how I made things that were zone projects, but I can't put it into words or even recall any feelings other than pleasure at how well everything was going. Even that doesn't really describe it.

Cannot be turned on or off, to me it's more a question of work flowing effortlessly through desire to apply oneself to it (as opposed to hanging out on a favorite internet forum :D ), and perhaps as importantly, making the correct judgement call every time judgement is needed - so there are no errors or bumps in the road. Cut off just enough, not too much, not too little.

When I worked in a shop 40 hours a week (more like 37, boss was always complaining about that) for a couple years, I don't recall getting into the zone much, just a few times. Motivation is lacking at $10/hour, and even a person who likes to work can get dispirited.

I do recall it once very clearly though, making a curly maple console table. I must have had it done in a couple days it went so smoothly and was so much fun. I remember another guy who worked there - his zone projects took ages because (I think) he didn't want them to end. Whereas you give him something he hated doing, and it was done in record time. Funny the boss never noticed that, but lucky for that guy :D

Re: *** SURVEY: THE IDES OF MAY ***

#8

Re: *** SURVEY: THE IDES OF MAY ***

Stuart Hough

Ellis,

I'll recount what we spoke about on the Tuesday chat this week. My most memorable trip to the "zone" came during my Mother-in-Law's visit to my home after my Brother-in-Law died several years ago. My wife and her mom were still struggling with the aftermath of Johnny's death, and I wasn't much help to either of them. I had taken a three day weekend off from work, and my wife said that her mom was going to look for an urn for Johnny's ashes. She asked if I could make some sort of box for her mother to use for this, to which I replied "of course".

After determining how large a box would be needed, I remembered that Johnny had studied cabinet-making at the high school he had attended, and had actually worked at a cabinet shop for about two years after high school. This gave me a rough idea as to how to proceed with the request.

Not really having done what I consider "woodworking" at that point (everything before was really only handyman carpentry) I took the materials, spread them out and stood looking at them for about an hour. This was on a Saturday morning about 9 am. What happened over the next 36 hours still amazes me. I cut out the sides, front and back, bottom and top. I rabbeted the ends where necessary, made grooves to receive the bottom and did a dry fit to check for square. Without a second thought, I glued the sides and bottom together, clamped them and set it aside to dry. I then turned to the top of the box, and decided to give it a raised panel look. I raised the saw blade, tilted it to what looked right, and proceeded to trim away the unneeded material. I got the edge down to about 1/4" thick, and only then, realized what I had just accomplished for the first time, and after patting myself on the back, got very sweaty, because I also realized just how close I had come to the blade with my fingers while I did this without any guards, or jigs. Whew! That was day one.

On day two, I made a top handle for the top, and bought the last piece of outside corner moulding in red oak that my local big blue box home center ever had, and proceeded to make four legs to attach to the corners and shaped the "feet" to a curved point. I sanded the box to 220 grit, did a wash coat of shellac to help seal the pores of the red oak sides, and after that dried, I put on three coats wiping poly, sanding between each coat. I then attached the legs and top handle, which had all been finished with the same method, and stood back to survey what I had just completed.

It was at that exact minute that my wife brought my Mother-in-Law out to check on my progress. They both stood speechless for about a minute, and then tearfully said one word..."perfect". The three of us just stood there and hugged for a while.

I have been in "the zone" many times over the years at work, at play, at study....but this was the first time while practicing my hobby. I did things I had only read about, and did them like a pro. Everything I did made sense, was efficient with tools and materials, and helped to create a sense of peace within. I guess, as has been said, "it don't get much better than that!"