Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

End tables *LINK*

Posts

End tables *LINK*

#1

End tables *LINK*

mdclor

These were inspired by the Stickley 516 book table aka Encyclopedia table. I wish to give special thanks to Bob Lang for his support. He did the measured drawings and published them in his book Shop Drawings for Craftsman Furniture and provided additional guidance both here on WC and via email as well. What a guy!

He also provided the below link. It is important to know how the originals were designed and constructed because one person thought the slats should all be on opposite sides. :D

At first glance the design appears to be fairly straight forward, but there are some devils in the details and I needed to consult with John in NM and Jess Cloud. Thanks, John & Jess!

I changed the design from the original to match a headboard I had done for this client and the color was to match some previously existing furniture. So, here is my modified rendition:





Thanks for viewing and any comments.


The Real Deal

Re: End tables *LINK*

#2

Very nice Merle!

John in NM

Those really came out well. I think I like the proportions better than the original - but then I like taller, slimmer tables.

It sure is nice to see that someone of my acquaintance actually finishes projects! :D (that's not fair to Jess, I saw a lot of finished stuff at his place too :D )

I usually get to 90% on my stuff and get distracted by something new!

Re: End tables *LINK*

#3

Re: Very nice Merle!

Jesse Cloud

Sweet piece Merle! Great craftsmanship.

The top is stunning. "Finished" you call it? And you glued all the pieces together?? I'll have to try that some time! :b

Your client should be most pleased!!

Jess

Re: End tables *LINK*

#4

Ellis Walentine

Great work

Ellis Walentine

The grain match on that top is wonderful. I like the richness of that color, too. Did you use a combination of dye and pigment stains?

Ellis

Re: End tables *LINK*

#5

Re: End tables

mdclor

John & Jess, thank you. Jess, I have seen your work close up and mine isn't in the same league. John, I haven't seen your work (hint ;) ) but I suspect because of all the accolades you work gets from others it is also beyond my capability.

Ellis, thank you, as well. I used 2 TransTint dyes in Target's WR40xx, then sanding sealer to give it a little more depth and finally sprayed 3-5 coats of EM6000.

Re: End tables *LINK*

#6

spray details

Bill Tindall, E.Tn.

Spraying something that confined is a challenge. Will you provide information on techniques and equipment used?

Re: End tables *LINK*

#7

Oh, I don't know about that!

John in NM

I think I've built one piece of furniture in the last decade :D I may have posted a picture of it, I can't remember now.

Mostly though, my time the last decade has all been spent on construction, cabinets and trim, and those grips and stocks I sell. I guess that's why I seem to have unfinished stuff around - it gets to the point of being useable but not done and away I go to something else :D

All the stuff that is actually finished is for paying customers! They wouldn't pay me otherwise :D

One of these days you guys will have to come down here for lunch. If Jean's away I'll even point out all the errors in stuff we've done. That bugs her to no end, but I tend to find errors more interesting than stuff that went perfectly or looks like it did. No one learns anything from things that go according to plan :D

(we even have a restaurant here, though its not up to Albuquerque standards :D )

Re: End tables *LINK*

#8

Re: Oh, I don't know about that!

mdclor

I'm ready whenever you and Jess can coordinate your active schedules. :b

Re: End tables *LINK*

#9

Actually...

John in NM

I have twelve days off starting Thursday, swapped schedules around with one of the other operators so she could go to an event over this weekend.

I'll send you guys an email.

If we meet down here, just watch out I don't hand you a stucco trowel :D That's the big project for the summer!

Re: End tables *LINK*

#10

Re: spray details

mdclor

Bill, I have an AccuSpray 12S gun which Jeff Jewitt recommended to me.

The first challenge was the glue up procedure. The collective brain trust determined that the legs and the upper sets of slats (leg assembly) could be glued together as normal. However, the lower sets of slats and the middle and bottom shelves (lower assembly) needed to then be glued to the leg assemblies as a single unit and the two top rails would be glued in at the same time as the bottom assembly.

I anticipated the issue you questioned, so I glued the bottom assembly without including the bottom shelf. So I was able to spray the insides of the bottom assembly angling the gun so it would spray the sides of the slats, one light coat from each direction. Next was the underside of the middle shelf-easy. Finally I sprayed the outside of the bottom assembly again angling the gun to get the outer portion of the slat sides. The bottom shelf, the top rails and the leg assemblies were sprayed separately.

Once everything was finished, I put the bottom shelf into the bottom assembly with a dab of glue on the center on both sides to prevent it from sliding back and forth. I doubt that it would move, but I thought a little glue wouldn't hurt. The end grain glue wouldn't hold much either so maybe it wasn't necessary. The remainder of the glue up is as described above.

I hope this is clear. I know I should have taken pix along the way but I just never think to grab the camera when I am in the middle of the project. Maybe I should add it to my plans as a reminder. :)

Re: End tables *LINK*

#11

Sharp & Stylish!