Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

using reclaimed fir that had insects (PIC)

Posts

using reclaimed fir that had insects (PIC)

#1

Adam of Oakland

using reclaimed fir that had insects (PIC)

Adam of Oakland

Hi Folks, I used this reclaimed doug fir 2x6 in a project which had a history of insect damage. But at the time I figured the bugs were long gone, and I don't see any evidence of further damage by the critters.

However I notice a strange effect where my peace of mind for using this stick decreases at a rate that is inversely proportional to the amount of time I put into the project :D

The pic below shows a typical patch of the burrowing. I dug out the dust that was left behind with a knife point, but the tunnels typically are packed with a mealy dust where exposed.

What do you think: am I crazy to bring such a thing into my house? Thank you in advance for any comments!


Re: using reclaimed fir that had insects (PIC)

#2

Re: using reclaimed fir that had insects (PIC)

Mark Mandell - Gone Round In New Jersey

Makes good kindling for the fireplace.

Otherwise you're asking for "IT"

Re: using reclaimed fir that had insects (PIC)

#3

will it fit in your oven?

Lars Parrington

if you can get the piece up to ~140 degrees F, that will kill any bugs / larvae that may still be in it. Just be careful not to get it any hotter if you have glue joints, as that can make the glue fail.

i did this to a truckload of maple one day by parking it in a greenhouse on a 100 degree day. I rigged a secondary greenhouse by covering the bed of the truck in clear plastic. The wood got up to 140. I was seeing little saw dust piles appear in the wood stack beforehand, but never afterwards.

Re: using reclaimed fir that had insects (PIC)

#4

Re: using reclaimed fir that had insects (PIC) *LINK*

John McGaw

I have certainly used wood for furniture that was in much worse condition that what you show. I had a very large sycamore sawn and it had the larvae of some really big beetle inside it; or I assume it was very large since the white larvae where the size of my pinky finger and larger. After cleaning it out by high-pressure washer and then drying it there never was any sign of further activity. And, given the size of those things, they'd be very hard to miss. The wood itself had beautiful spalting and fungus staining and was a pleasure to work with overall.

Bonus factoid: the material left in the burrows by insects and their larvae is called frass, apparently from the old German.


Wormy Sycamore Chest

Re: using reclaimed fir that had insects (PIC)

#5

Adam of Oakland

Re: using reclaimed fir that had insects (PIC)

Adam of Oakland

aha, "Frass" I did not know that is what that stuff was called. nice blanket chest by the way, mr McGraw

Hi Lars: nope, won't fit in oven, but that is the process I've been hearing about on my google searches.

alack.

Re: using reclaimed fir that had insects (PIC)

#6

A Bigger Oven

Mark Mandell - Gone Round In New Jersey

Wrap and seal your board (s) in black plastic sheeting and put them out in strong sun for 5-6 days, turning them 3 time a day to put a different face up to the sun. After the wood gets to 170°, whatever's in there is cooked and done.

Re: using reclaimed fir that had insects (PIC)

#7

Re: using reclaimed fir that had insects (PIC)

Keith Newton

Adam, look in the articles section, and you can find a cheap easy method that I use to heat it, with a space heater, and tarp.

However, if the holes were not all tight little circles in the face before you planed the face, it appears those larva were probably in there before the tree was sawn. That is, they don't chew out then along the face, and back in as shown in your photo.

Re: using reclaimed fir that had insects (PIC)

#8

just wait and see if bugs come out

Lars Parrington

Since the bugs may be long gone at this point, the most reasonable option may be to just put the piece in an out of the way spot and check on it every now and then. If little piles of sawdust show up, then there are still bugs in it. But if you don't see any sawdust piles, after a while you can assume it is clean. The next question is how long do you have to wait?

If I remember right, the bugs usually emerge around late spring, i.e. nowish. So it may be safe just to watch it until mid summer. Alternatively, you may want to give it a year or more.

The bugs seemingly prefer wet wood, so even if bugs do emerge from your piece, they're not necessesarily going to find a home in any of your other woodwork, since it is all dry wood.

Re: using reclaimed fir that had insects (PIC)

#9

Adam of Oakland

Sound advice, Mr. Lars...

Adam of Oakland

Lars: I'll go that route. My wife likes the burrows left in the wood. These were boards that I had resawn from 6/4 material, and that's why we see them exposed here. I'll keep an eye on it for now and fingers crossed things will be OK. If not, it's localized to one spot and with the right chemicals, I think those bugs don't stand a chance. Famous last words :D

Mark in the Garden State: yep, next time i intake a few suspicious boards, i'll be cooking them before i actually start using them in a project. Thanks!

Keith: I just read your article on this site. very nice setup, and not spendy at all. Next time, I will shoot for this approach. Gosh wood central is a cool place to hang out!!! Thank you!!!!

-Adam