Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Tage Frid

Posts

Tage Frid

#1

Tage Frid

Matthew Robinette

I recently picked up the three volumes on woodworking by Tage Frid.These are books I should have read first when I decided to change from general carpentry progects to woodworking. He had a way to break the process down to simple steps to be practice d and built upon to achive the desired results. The man cut dovetails with a big freakin bow saw not a dainty gentleman's saw. He has been gone ten years ago today. Wish I could have met him.

Re: Tage Frid

#2

Yes, he had some great methods.

Keith Newton

That he shared with his followers, back in the early days of FWW.

I made a slightly altered version of his router mortising jig back then, and still use it every now and then.

Re: Tage Frid

#3

Re: Yes, he had some great methods.

Bruce, a MN Galoot

His mortising jig is still my go-to method. I also got a Makita router because of the pics in his books. Sure learned a lot from those books.

Re: Tage Frid

#4

Re: Tage Frid

TomD

Been there done that. You would probably enjoy the Taunton Video he did. I like the way he cut dovetails, particularly the hammer the half laps method for extending the saw cut. I use a putty knife or something similar. He has some odd ideas on saws, that pic of the Japanese saw, with all the teeth stove in is ridiculous. Though I did have one that looked like that after the saw hit a staple. With Frid's saw a refile would have been a lot easier. Interesting that the Chinese cut their joinery with a bowsaw, I kinda prefer their saw, and tried to make one. The Saw Frid had was Danish (big surprise), and some of the US suppliers used to carry it, though I don't know who still does.

FWW, which seems to lack an institutional memory, did a whole cover story on some new router jig that some guy discovered, and that was in the Frid Book, and maybe the video. I guess those who don't study history are doomed to repeat it.

Re: Tage Frid

#5

Re: Tage Frid

Hank Knight

Speaking of Frid's ideas about saws, he didn't like much set in his saws. He was doing a demo at Highland Woodworking years ago, and the saw they gave him to use had too much set for his liking. He asked for a hammer and proceeded to "remove" the set by pounding the teeth on a brand new Unisaw table. The Highland Woodworking folks suffered a severe case of apoplexy, but he got the set he liked and continued the demo.

BTW, Frid's books were my real intro to serious woodworking. I like his approach and still follow a lot of it.

Hank