More new-fangled furniture ideas *LINK*
John McGaw
There is always a different way to do the job; but not necessarily a cheaper way.
3D Printed Joints
Knowledge You Can Build On — Est. 1998
More new-fangled furniture ideas *LINK*
John McGaw
There is always a different way to do the job; but not necessarily a cheaper way.
3D Printed Joints
IMO it isn't aesthetically pleasing.
Pretty neat!
Tony - Memphis
Neat idea. Something like that would also be great for setting up a temporary work surface in the shop - easy to take down and store.
Tony
Re: IMO it isn't aesthetically pleasing.
Jason Roehl in Lafayette, IN
In the main picture, I'd agree that it's not much to look at, but if the 3D-printed parts were painted quick with a rattle can of something like a dark red-brown or even black, I think it would greatly enhance the look of the piece, even as simple and cheap as it is.
Jason
Re: Doesn't look strong either
TomD
The material is just plastic, some printers can print in steel or Ti, but they are closer to one million dollars. The architecture of the top table is very highly stressed. The loads approach infinity as the angles approach a straight line.