Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Ramped-up dust collection.

Posts

Ramped-up dust collection.

#1

Ramped-up dust collection.

James Heaston

I just acquired a 55gal drum w/ the full lid. I want to use it as a precollecter to my Jet Dust Dog. When milling rough lumber the bag fills up to quick. The Dust Dog starts off w/ a 6" opening & Ys into 2 4'' connectors. I'd like to use the 6" into the barrel & then Y off to the 4" on the infeed side.

I only use one hose at a time so would be a waste to plumb it w/ 6"?

Plus is there 6" flex hose out there somewhere?

Re: Ramped-up dust collection.

#2

Re: Ramped-up dust collection. *LINK*

mdclor

I can't answer most of your questions, but Oneida has 6" flex tubing.


6" Flex tubing

Re: Ramped-up dust collection.

#4

Re: Ramped-up dust collection.

Barry Irby

I made a precollector out of a roll around RubberMaid trash can. I am not following your questions well enough to answer, but I can tell you that my homemade one works well, but I have stopped using it because my shop is too small. I could send you a picture if you like.

Re: Ramped-up dust collection.

#5

Re: Ramped-up dust collection.

James Heaston

Thanks for the links mddor & Mark. I should have thought of them. DUH!

Barry I'm not sure what to ask. I guess I was wanting some one to come on & say "I did this, & this, & this." We woodworkers are an ingenious lot & pretty sure one of us here has done what I want to do.

Another thing that bugs me is why did they put the infeed on the side instead of on the top? :\

With the info I got from the links I need to get back to shop & do some thinking.