Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Surgical

Posts

Surgical

#1

Surgical

Gary Smyth

Rarely do I purchase stuff demonstrating more money than brains, but yesterday I exercised that option. I bought one of two trays of medical tools. I was looking at a stainless trepanning drill and hand brace which I bought at $5 each – mostly to show here, to show the closeness of medical tools to those of woodworking, AND to provide a picture of how NASTY some of these tools are. As it happens the weather was below freezing and there were few takers at the sale. I made the rounds a couple of times but kept going back to the table to try to noodle out if I could use the tools for woodworking. Third time through the guy asked me if I wanted additional tools and he would make me a good deal. I told him that I didn’t have a way to use them, and the one trepanning drill and brace was enough. He said "Make an offer". I repeated had no use. He kept pressing. "Make an offer" he said. I said "$20", hoping to withdraw. He said "$30". I said "sold". Well, here they are. 63 lbs. of very sharp drills, trepanning burrs, probes, screw starters, corers, with hammering and squeeze handles all very heavy and made of bright stainless. What I have now is a heavy, sharp, useless paperweight. So before I try to amend a few and perhaps shadow box frame a couple for display, any suggestions for real use for others. By the way, I ordered a catalog from the distributor to try to identify the names and the original intent for what I have. Maybe then I'll get more ideas.

Re: Surgical

#2

That explains it

Bill Tindall, E.Tn.

I know several Dr's that do woodworking. Now I see why . Better to practice on walnut and mahogany!!!!

Re: Surgical

#3

The slide hammer makes me a bit nervous

Bill Houghton, Sebastopol, CA

I hope that was not one of the tools my doc used during my surgery.

Re: Surgical

#4

Jason Roehl in Lafayette, IN

Re: The slide hammer?

Jason Roehl in Lafayette, IN

I was thinking that semi-spherical cheese grater thingy looked like it has no business in an OR.

Jason

Re: Surgical

#5

That's one way to install pins,  The

Gary Smyth

screw countersinks, grinding burrs, and reamers are scary too. The hemisphere is a 3" diameter microplane, but of heavier gauge metal. There are two sizes in this collection. I'm told most of this stuff is now computer controlled and most drilling and grinding is done with a digital readout and laser, but can you imagine having to drill a 3/4" diameter hole, seven or eight inches deep, hand held, into bone? I mean, do humans even have a bone large enough to drill with those tools?

Re: Surgical

#6

You need a supply of these...

John in NM


Re: Surgical

#7

Re: Surgical

Yonak

Some may well be worth something to collectors. Doctors, in general, have lots of money and some collect old mecical devices. If you can find out what they're called and their use you could list them individually on ebay.

Re: Surgical

#8

Perfect


Re: Surgical

#9

Re: Surgical

Frank /Fenton Mo.

When I was in the service I broke my leg in 3 places .The femur was a compound brake.

They fixed it with a rod that had threaded ends and ran the length of the femur and leaving one end

out of the bone so they could attach to it later .Two years later had a surgery to remove said rod .One little cut on my butt check and attach a slide hammer to the rod and bang bang bang the rod is out and on a shelf in my shop for the last 40 years

Re: Surgical

#10

Turns out

Gary Smyth

these are all orthopaedic tools. I did find many similar on ebay. From what I see there are no antiques in my tray. No telling the condition of the ones featured online, but sellers are asking a lot. While what I bought is quality,and by my eye decent, I wouldn't expect a good doctor to purchase used tools unless he/she was sure of the source. The cost of checking them/reconditioning these for human use again might not be worth it. You may be correct though, it might be worth a test in the ebay pool. My folly is now referred to as the "Inquisition tray".

Re: Surgical

#11

Wow, what a bargain!

John E. in SC

I'm a family doc in my "day" job, and would LOVE to run across a collection of medical tools like that for $30! As a family doc, I don't get to play with too many "tools", but the orthopedists are definitely the "construction workers" of the medical field. Some of their surgeries are incredibly physical, to the point that they have to wear vests that circulate cold water through them to keep them from sweating too much and dripping on the patient!

If you decide you want to sell those (and no, they're not likely to be useful in an OR today - they're "retired"), I would be happy to double your money for them! :)

Re: Surgical

#12

Re: Wow, what a bargain!

Paul Londo

Find out what time period they were used in and talk to a reenactor of that timeline,I know 18th century renactors that paid a lot of $ for reproduction surgical equipment.