Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Washing machine problem....

Posts

Washing machine problem....

#1

Washing machine problem....

Chuck in Mtl.

My 20 year old washing machine does not wash the clothes properly as the agitator barely moves back and forth. I hear a belt squealing noise from the machine when the transmission kicks in during the wash cycle. I am wondering how hard it is to change this belt, if it is a belt in the machine. Thx.

Re: Washing machine problem....

#2

Re: Washing machine problem....

AZ in Colorado Springs

Google can be your friend in looking up repair procedures. i recently troubleshot a friend's washing machine this way.

Re: Washing machine problem....

#3

Re: Washing machine problem....

Mark Nowicki

What brand of machine?

Mark

Re: Washing machine problem....

#4

Re: Washing machine problem....

Chuck in Mtl.

Its a 20 year old GE.

Re: Washing machine problem....

#5

Re: Washing machine problem....

Mark Nowicki

I had a similar sound coming from our Maytag Atlantis washer. The problem was the pump.

http://www.google.ca/imgres?imgurl=http%3A%2F%2Fappliancecarestore.ipower.com%2Fstore%2Fmedia%2FWashers%2FLP128.jpg&imgrefurl=http%3A%2F%2Fappliancecarestore.com%2Fstore%2FLP128.html&h=300&w=400&tbnid=p6fFM2PVfDh8eM%3A&zoom=1&docid=_0UsdbbKOVldoM&ei=DOgxU9GuLur7yAGy_YGIDg&tbm=isch&ved=0CFcQhBwwAQ&iact=rc&dur=494&page=1&start=0&ndsp=24.

Maytags are relatively easy to work on , because the front panel is removable giving easy access to the components. I have no experience with GE.

For parts and advice I got to Apollo on Gouin Blvd. in Pierrefonds, just east of St Charles. GE parts are also available on Dickson (?) near Hochelaga. It is the building past the CAMCO factory.

If Mtl does not stand for Montreal, then "never mind" the last paragraph.

Mark

Re: Washing machine problem....

#6

Re: Washing machine problem.... *LINK*

John McGaw

There are a load of old GE machines, of course, but this page might give some generic assistance. Otherwise you might just Google for the model number to see what shows up.


Opening the can

Re: Washing machine problem....

#7

Re: Washing machine problem.... *LINK*

Bob Entwisle in NJ

Hi Chuck,

I've fixed a number of machines over the years.

I find that the Sears Parts Direct web site is good for punching in your make and model number and then getting a parts diagram, complete with manufacturers part numbers for the parts. Having the diagrams of the machine is helpful even just for opening it up, as well as for troubleshooting the problem.

Bob in NJ


http://www.searspartsdirect.com/

Re: Washing machine problem....

#8

Re: Washing machine problem....

Chuck in Mtl.

Yes mtl stands for Montreal in my case...will check out Apollo parts this weekend. thanks for the tip.

Re: Washing machine problem....

#9

Re: Washing machine problem....

Mark Nowicki

Wow, he has a web site, who would have thunked;-)

http://www.apolloparts.com/enindex.html

I strongly suggest you call first. he MIGHT be open till 1:00 on Saturday....

Mark