Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Car Guy Question

Posts

Car Guy Question

#1

Car Guy Question

Barry Irby

The trans mission in my 2003 Honda CRV slipped as I was turning a corner and accelerating. The Fluid in it is black. A friend suggested the station that check the fluid did it wrong. The engine was off and cool and (?) should have been Running and warm.

So, does changing the fluid help?

Is flushing the transmission different and better than just changing the fluid?

What's next? Rebuilding the trans? Installing a rebuilt trans?

How do you find a decent trans and shop?

Show me the magic.

Re: Car Guy Question

#2

Re: Car Guy Question

del schisler

Barry all the trans fluid i have seen is a nice redish color not black, sound's like it is burnt? smell it if it smell burnt , i would change it and see if that will help with the slipping . their may not be any good part left in the trans fluid ? good luck, not a cheep fix

Re: Car Guy Question

#3

I think I know

Dustmaker Mike

first off I am not a tranny person but I have experience with these. I would first smell the fluid and see if it smells burnt. Is so there is more problems if not then a simple flush should help. You can try this yourself or if you are like me I head to a jiffy lube and have them do it. The last one I had done on a 96 Jeep they hooked up a line to the input to the radiator (out of the tranny) and another one to the input to the tranny. The dirty fluid went into one container and clean fluid went back into the tranny. This way they get the torque converter fluid and all. When they finish I normally head home and drop the pan and change the filter and wipe out the bottom of the pan. I reinstall it and off I go. If it needs rebuilt I would head to a shop that offers a national warranty.

http://www.localautotransmission.com/ start here and then the BBB to see how they rate. Good Luck

Re: Car Guy Question

#4

Re: I think I know

Jerry Roberts

I hate to say it but...Hondas are noted for their xmission failure. Im on my second one. First was a 2000 Accord with 130k miles and slipping between 1 and 2.Needed new xmission. Bought a new odessey instead. my two daughters have Hondas with slippage problems as well and I know other people with same problems. They said machanics told them abt Honda xmissions. Of course your problem might not be the same but...Good luck.

Re: Car Guy Question

#5

Re: Car Guy Question

Mark Nowicki

Barry, what is next is that you READ THE OWNERS MANUAL ( yes I am shouting)

After you READ THE OWNERS MANUAL you f check the fluid LEVEL, NOT the COLOR, NOT the SMELL, NOT the TASTE, but the FLUID LEVEL.

Next you flush the fluid, either yourself, or at a Honda DEALER, who will use HONDA fluid and will know the PROPER procedure. I know the dealer might be 77 cents more expensive than Chicos Garage and Money Transfers but it the difference is worth it.

According to my Honda Accord MANUAL, the proper way to check fluid is at normal operating temp, engine off.

Your friend is probably a Ford or a GM guy who last bought a car 30 years ago.

A Honda flush consists of a fluid change, drive till normal temp is reached, drain, replace with new fluid. Repeat three times.

A rebuilt Honda Accord transmission purchased from a dealer costs aprox. $ $1500 parts only.

There is more to the internet that WoodCentral, especially when it comes to cars.

www.ericthecarguy.com

Mark

(2002 Accord, 456000 kilometers, original transmission)

Re: Car Guy Question

#6

And the answer.....(I hope)

Barry Irby

Limped back to the shop that has serviced it for years. they discovered that the fitting to the radiator were loose and it was spraying fluid back onto the transmission. Three quarts low. They wondered it would shift at all. They cured the leaks and flushed it and installed fresh fluid. I have only driven it about three miles, but it seems fine. 48 hours earlier a mechanic at a different shop told me the fluid level was fine. Thanks for the Input and Glad I got it to them when I did.

Re: Car Guy Question

#7

Oh, good grief....


Re: Car Guy Question

#8

tell the first mach. to go back to school ??


Re: Car Guy Question

#9

...if he ever went to school....