Re: OT- Printer Cartaridges
TomD
That is why I don't use those things. Kids, however, got interested in T-shirt printing, and I have been looking at them again. The dudes that do T-shirts buy set-ups that feed directly from the bottle. Or they use syringes to fill their cartridges. So the pros, so to speak are refiling their printers, all the time. Epson seems to be the preferred brand. That means that: 1) refilled cartridges are good; 2) if you do it yourself; 3) or can find the good ones. 4) There is a lot of demand for refilled cartridges that can be served by amazon, ebay, local t-shirt, and photography suppliers, etc...
There are forums for t-shirts; photography, printers by brand; etc.... where you can find info on this stuff. At the local level the people selling this stuff are often companies that sell binding, printing, or signmaking.
When you buy a printer, you often have two identical choices with similar model numbers, where the only difference is that one comes with virtually empty cartridges, and another with virtually full. That can be played several ways. For one, if you are going to substitute one of the fancy refill systems, then you can save money by going with the empty cartridges one. However, if you are a casual user, the empty cartridges one may entice you by it's low cost, when an extra 40 would have got you full cartridges, and you wouldn't be facing buying those later for 100, so the more expensive one can be a better deal for some users.
I am not sure on all the details on this, but I think the part that gets clogged if you buy bad replacement cartridges is in the cartridge, so you can alway just unclog it without worry of damaging something important, or you can replace the cartridge. There are theories as to how to best run these printers, whether to leave them plugged in or how to clean them, on these speciality forums I have mentioned.