Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Bugs in Oak questions

Posts

Bugs in Oak questions

#1

Bugs in Oak questions

Barry Irby

July a year ago a 42" diameter White Oak fell on my rental house, doing about $23,000 in damage. To get even with it, I had it quarter sawn and stacked on stickers in my driveway. It was stacked last October and has air dried since then. A month ago I moved some of it into the house to acclimate further and I am building a small table out of it. I found some bug holes in it and some spalted wood. I think the spalting occurred while it was in the tree, but I am not sure.

The bug holes are about 1/32" in diameter and mostly in the spalted part but some are out in the sound wood. So, what should my response be? Should I treat the rest of the stack? With what?

( I kind of like the spalting and bug holes.)

Re: Bugs in Oak questions

#2

missing data

Bill Tindall, E.Tn.

Was it stacked in a way it could have rotted (common word for trendy spalted word)?

Where the rot and bugs there before it fell. Did it fell because it was rotten....... and similar questions.

If it dried normally whilst on sticks it would not have rotted nor likely gotten invaded by bugs this quick after sawing. In this case do nothing. The presence or absence of bug dust provides a clue.

Re: Bugs in Oak questions

#3

Re: missing data

Barry Irby

It was sawn and brought home in a few days and immediately stacked on sticks and off the ground on cinder blocks. The stack is about four feet by eight feet and eight feet tall. There is a sort of goofy but effective "hat" on it that keeps the rain off. (Its a huge hot tub cover that projects beyond the stack all the way around. A friend of mine sells them and gave me this one that would not sell.)I am almost certain the rot/spalting was present when we stacked it, but not sure. I don't recall seeing it, but the stuff was covered in the sawdust left from the bandsaw. the way its stacked I doubt it rotted in the mean time. This lumber came fro the top of the stack or near it, because I am too lazy to unstack it to get to anything lower down and almost too short to reach the very top.

Re: Bugs in Oak questions

#4

Re: missing data

Bill Tindall, E.Tn.

If rain was not captured in the pile, and it sounds like it could not have been, the rot predated the sawing and likely was the cause of the tree failing.

We need a picture of this pile and cover. It reminds me of an outhouse I saw here in TN. The roof was the hood from some vintage car. It looked high class.

Re: Bugs in Oak questions

#5

Re: Bugs in Oak questions *LINK*

Keith Newton

Barry, If the insect holes are black, this is a good sign that they were in the tree while it was alive. If they are white, and if there is any frass on the next board down, then they are in there. Also, any holes which are tangent to the face of the board, or even exiting at an angle indicates pre-sawing. But if all holes are perfectly round, straight out, they were after sawing, and probably still in there.

The little heaters that I've used would be too small for that big stack, but if you broke it into half or thirds, you can probably get it up to 140º in a couple of days.

Also, since writing this a few months ago, I added a taylor thermometer like you would use in thick meat, or turkeys. By drilling a hole the size of the probe, I can measure the temp in the middle of the thickest board in the stack, and the price was under $20


Debugging Wood Article

Re: Bugs in Oak questions

#6

The holes are black....

Barry Irby

I was thinking about that. There are not very many and the rot/spalting does not extend far into the boards or stack. I am trying to remember is the tree had a scar on it that might have been the genesis of the rot. The tree was felled by a microburst storm at the end of June a year ago. The tree guys removed it from the house July 4th and 5th, I put Anchorseal on the logs a few days later and then had it sawed in October. I had a broken hip at the time and did not participate as much is I might have. Its been stacked and stickered ever since.

I had two slabs cut out of the smallest log and they are on the bottom of the pile.

Will the bugs survive if I do not heat the pile once they are in the furniture and the wood is thoroughly dry? Some of the holes are so straight I can see all the way through them.

Re: Bugs in Oak questions

#7

Re: The holes are black....

Bill Tindall, E.Tn.

If the tree lay on the ground during the summer the sapwood where it touched the ground would almost surely have decayed.

Re: Bugs in Oak questions

#8

Re: The holes are black....

Dick Coers

Just because these holes are black, it doesn't mean there won't be fresh ones. The larvae can spend months or years inside the wood. When they emerge as adults, that's the hole you see. Could very easily be larvae in that wood you have.

Re: Bugs in Oak questions

#9

Re: Bugs in Oak questions

Jim Hoeller

It sounds like powder post beetle larva and if you can't get the temperature of the wood at or above 140 degrees, then consider treating with either Timbor or Boracare. I have used Timbor on some air dried butternut and it seems to have worked. There may be alternative products available.