Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Saw Blades

Posts

Saw Blades

#1

Saw Blades

Kelly M. Rbison

Hi All, A friend told me about some new saw blades he heard about. I am thinking about trying one for my table saw. I use my Freud 24 tooth for most of my ripping. These "new" blades are: "TENRYU" and "SKARPAZ". I have no idea where they are made or their quality. I don't mind paying more for a really good blade that I can re-sharpen; but I also don't want to waste my money. Does anybody have any experience with these blades???? I don't remember ever seeing them advertised in any of the wood working publications. Let me know; good bad or indifferent.

Thank you, Have a great weekend,

Kelly in Port Orchard

Re: Saw Blades

#2

Re: Saw Blades

del schisler

go here their are lot's of sites and people that have them

https://www.google.com/#q=TENRYU%22+and+%22SKARPAZ

Re: Saw Blades

#3

Tenryu

Bill Tindall, E.Tn.

Whenever I can (which is most of the time) I use 7 1/2" 40T industrial quality blades on my Delta cabinet saw for my furniture making. At IWF I was given two Tenryu blades for evaluation, a 40 tooth and a 50 tooth, thin kerf. These blades left a rougher cut than the CMT, Freud or Sthiele blades I had previously used.

My recommendation would be to stick with Freud, CMT, Amana, or any other industrial quality blade not made in China.

Re: Saw Blades

#4

JL

Re: Saw Blades

JL

I have tried a Tenyru. IMO it is a reasonable blade. My friend Mike has one on his Grizzly. We ripped quite a few board feet of birch and cherry for a project on which we were working. Also ripped a bit of 3/4" cherry VC plywood.

IMO, it works as well as my Freud LU84. YMMV

Re: Saw Blades

#5

Re: Saw Blades

Kelly M. Robison

Thanks All, Appreciate the input. I think after reading the comments; I will stick with the tried and true blades that I have been using for years; CMT & Freud. I KNOW that I can get these re-sharpened and they have proven themselves to me.

Thanks again,

Kelly in Port Orchard