Warren Knight
Gary Smyth
Mark,
This calls for a picture. When it comes to surveying tools condition is key. These were made out of Philadelphia. From their site, "In 1908, C.F. Iszard and J. Henry Warren organized the Iszard-Warren Company to design, manufacture and sell precision surveying, engineering and scientific instruments. In 1913, our quickly expanding company became known as the Warren-Knight Instrument Company. For many years, W-K manufactured and operated at its Center City location. In 1963, Warren-Knight moved to its current location in Northeast Philadelphia." They are still around but don't expect much help there (unless you want to repair) as they get your question quite often and they mostly don't have time. Warren-Knight made (makes) surveying levels and farm levels as well as transits. I think I have some WWII era W-K nautical stuff around. They were a mid level quality firm in the time period you state. You need to check the optics first for cleanliness, then the bubble levels, and if the crosshairs are in tact. Then check screws. Any repairs needed are likely to be expensive, especially repairing crosshairs and calibration. People who buy these typically want to display them, as opposed to using them, as modern stuff with lasers are easier to use and probably less expensive... unless they are exposed brass and not black. If you have a model number it would be helpful as there are old engineering house catalogs still around to check original prices at the catalog date. In Western PA at a really good flea market there will be two or three levels and perhaps one transit available. Some owners think that they have a gem but may only have a "typical" unit, and really not worth much if it needs help. The reason you don't see all you have is that the other stuff likely was sold/collected separately. By the way, in the case a lens hood, soft dust brush and a (usually) spanner wrench ought to be there. Also check the tripod head and the level base to make sure that they mate. Various companies used different threads and sizes of the screw base. The base ought to have a chained "keeper" to protect the tripod threads. I bet that there are W-K samples to give you a start if you stick with ebay. Check "scientific instruments", "engineering tools", or "Warren-Knight" as topics . As to a house for selling. Try tool auctions. These were typically not "good enough" to be considered fine engineering instruments.