Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Little hydraulic piston/pump Available for gadgets

Posts

Little hydraulic piston/pump Available for gadgets

#1

Little hydraulic piston/pump Available for gadgets

Barry Irby

My friend who buys stuff at freight auctions just bought a tread mill that includes what appears to be a little hydraulic pump and piston. I know almost nothing about it, but it looks like it would have about a four or five inch stroke. Just seems like something that would be useful for making some sort of gadget. If anyone is interested, I can get it for the cost of shipping. He's parting out the tread mill and does not think this has a lot of value. The label is in Chinese and meaningless to me. I am guessing it runs on 120 volts AC, but I really don't know. He also has the main motor which is 90 volts DC, if anyone cares.

Re: Little hydraulic piston/pump Available for gadgets

#2

My Bad, Not Hydraulic, Its a screw Jack

Barry Irby

It has a screw in it with acme looking threads and it will move about 3". There is enough labeling in English to indicate it does run on 120 Volts ac. Still looks like an interesting toy. It was the gadget that raised and lowered the tread mill so you could run on an incline.

Re: Little hydraulic piston/pump Available for gadgets

#3

Re: My Bad, Not Hydraulic, Its a screw Jack

Chuck Hans

Sounds like a linear actuator from the description

Re: Little hydraulic piston/pump Available for gadgets

#4

Re: My Bad, Not Hydraulic, Its a screw Jack

Barry Irby

I looked on EBay and Amazon and they are sold as Treadmill Incline motors. There is an identical one on there for $50. It just looks like a great toy. I think it would be easy to modify it to have as long a travel as you might want by just adding a piece of All Thread. Basically, its a little right angle drive that is reversible. I'm thinking it could raise and lower the table on your drill press or some such thing.

Re: Little hydraulic piston/pump Available for gadgets

#5

Re: My Bad, Not Hydraulic, Its a screw Jack

William Duffield

We were recently discussing a carving appliance that something like this might be useful for implementing:

http://www.woodcentral.com/woodworking/forum/messages.pl/md/read/id/476832/sbj/neat-carving-table/

No, I don't want it. I have too many irons in the fire to start another project in the near future.

Re: Little hydraulic piston/pump Available for gadgets

#6

That was what I thought about too, but

Keith Newton

I don't have the bowling ball yet either. Be my luck, I get hit by one falling out of the sky or something soon. If that happens, I'll get back to Barry.

But my next tool-build is going to be a portable Solar-kiln.

Re: Little hydraulic piston/pump Available for gadgets

#7

Re: That was what I thought about too, but

William Duffield

Keith, I hope your ribs are feeling better. I also don't have room in my shop for another fixture, until I get some major reorganizing done, and that's going to have to wait until this winter is really over. I woke up this morning to 3" of new, slippery snow, so I'll find things to do in front of the computer instead of out in the shop or on the road.