Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Instead of live edge, Live-face?

Posts

Instead of live edge, Live-face?

#1

Instead of live edge, Live-face?

Keith Newton

I have a project which I'm just starting, which is to take a whole tree apart, and re-assemble it in a restaurant. While out searching for a hollow one, which would lighten the weight, and shorten the drying time, I happened to find through a good friend, a huge Swamp Chestnut Oak near my cabin. The DBH was 17' 8", with more than 20' to where the limbs had fallen off.

The wall thickness down where I cut a window into it, was ~ 2", with very close annual rings. The bark is pretty easy to get off, even though there is some decay started in most of the sapwood, the face under the bark looks pretty good. Since this could yield several hundred feed of virtual lumber, with a live face, rather than the edge, I've started trying to think of creative ways to use it.

I was thinking that there should be a market for some rustic, yet creative things, using this wood with the natural face, or at least partially surfaced. Seems like there ought to be a market for useful furniture suitable for a man-cave or hunting lodge, that didn't look like an interior desecrator, I mean decorator would choose for the city space.

Do any of you know of anyone using the wood from hollow trees? Some of the most remarkably figured wood I've come across was in hollow trees, with great limbs which may have been solid. I'm just speculating that the extra compression and torsional loads exerted without the added support of the heartwood, may contribute to that.

Re: Instead of live edge, Live-face?

#2

Re: Instead of live edge, Live-face?

Dick Coers

How are you going to "debug" and remove all the small wildlife from the log before it goes for the install? How about getting it dry enough to stop mold? I sure wouldn't want to be the guy that brought termites, powder post beetles, and who knows what else into anyplace. Be sure to add in a fumigation cost for them into your price! Once did all the fixtures for a children's book store. They had a guy take molds off the bark of a tree, and then he made plaster casts. Easy to make it hollow! He also put a ladder in it, and a platform at the first crotch section. It was a wonderful attraction in the store.

Re: Instead of live edge, Live-face?

#3

Thanks for asking, Dick

Keith Newton

That is certainly a consideration which needs to be addressed.

Just a few weeks ago I responded to Ellis's question for that information. Here was my response, which is now in the articals archives.

Drying and De-Bugging Air-Dried Wood

This shop-built drying method reduces moisture content and kills bugs in your wood.

by Keith Newton

Re: Instead of live edge, Live-face?

#4

Re: Instead of live edge, Live-face?

Gary Smyth

Keith. There are several good references that might help find you areas to search or at least ideas of application of stripped style architectural feature/ furniture -- “Adirondack Style”, Ann Stillman O’Leary; “Adirondack Home”, and “Cabin Collectibles” Dr. Ralph Kylloe; “Great Camps of the Adirondacks”, Harvey Kaiser; "Molesworth” Terry Winchel; “Boathouses” John De Visser & Judy Ross; ”American Country West”, Carol Sheehan; “Rancho Deluxe”, Alan Hess. Most of these are “coffee table books” featuring photos of camps, mountain homes/cabins, boathouses, ski lodges. Designers are featured, but so are sources. There are other I've seen -- some are barn conversions and even mills. Perhaps one of these will provide some clues to help get you directly to what you want.

Also, there is a site named "Houzz". You will have to sign in and register, but I typed in "rustic furniture" and 97,600+ pictures became available. There are so many selections it can drive you bonkers, If you see something you like sources and email questions are available if you select the photo.

Re: Instead of live edge, Live-face?

#5

Thanks Gary, That should help get,

Keith Newton

Get my mind right. Already, I'm starting to see some good uses for certain parts of this wood. I went back down yesterday to look it over again. There are certain parts that will have some amazing grown-in texture, and of course, down at the base, where it flairs out, would make nice back legs, leaving the live edge toward the back.

The thing I need to worry most about, is getting it down. I can't count on a hinge working on something like this. Not to mention how it would blow all to pieces when it hits the ground.

Re: Instead of live edge, Live-face?

#6

Dropping the tree

john Veerkamp

Drop the main bulk in pieces starting as high up as safe. Then to preserve the "chair" at the bottom, make your wedge and hinge cuts about 4' above the base. make the final base cut a few inches above the ground. Use plenty of wood or plastic wedges to keep from pinching the saw blade.

Re: Instead of live edge, Live-face?

#7

Re: Dropping the tree

Mark Mandell - Gone Round In New Jersey

John,

It seemed as though he wants it mostly in one piece which would indicate a crane take-down.

Re: Instead of live edge, Live-face?

#8

Did you Say DBH 17 FEET 8 inches?

Barry Irby

I am having a hard time visualizing any oak that big. Let alone trying to fell it. I would bring in the pro's.

Re: Instead of live edge, Live-face?

#9

My bad, that was the Cir. It was 5.75 DBH


Re: Instead of live edge, Live-face?

#10

I've already talked with a tree trimmer w/crane.

Keith Newton

I'm going to inlist his help, so I can take it apart from top down.

He already has a job to take a big pine down a few blocks away. And we have a few more really large ones too close to the cabin for comfort, that my sister wants down, so I'm working on a trade with him already, to use his tractor to get those big log sections onto my Woodmizer.

I'm just not sure what I'll do with ~5000 bf of SYP though, unless Ben and I can figure out where to build a timber frame out of it.