The temps here are warming slightly and all the frozen stuff is gone. The good news I have this week is that my broken shop heater has now been replaced by a used Modine natural gas shop heater. I got it off of a guy at work who listed it on our companies classifieds for $100. It is installed and running and I love this heater!!! It is quiet, more effective, and more efficient than what was in the shop before. I do need to do some vent work but for now, it will do fine until I can get the gas vent properly setup the way I want it.
Haven't had time to work on the LOML Jr's blanket chest because of family, work, and lack of heat in the shop. Now I just need some time to get out there and get busy on it. I've had a defective cutting board that I made come back to me and I need to remake it for my customer. I expect to have that done this week.
Happy president's day to you and may you have a great day today.
That's it for me, so what did YOU do this past weekend??
I spent part of this weekend making images with a winter theme. With the abundance of snowy owls in my area this winter I have been out looking for them, I found this one the other day, incredible to witness it fly by!
Oakville is on the edge of Lake Ontario, this winter with as many cold days we’ve had the ice scapes have been inspiring! Here are a few..
Today is Family Day in Ontario, a nice mid winder holiday, I’m off to play hockey, what else could make it better than that!!
I finished working out the final details of the leg vise for the new workbench. It works great and hopefully next weekend I will be able to get it attached to the frame.
I wish there was something in the ice shots for scale. I can't tell how large the formations are.
If you get another chance to shoot the Snowy, try dropping the exposure in your camera down a stop or two. This will pick up more detail of the white feathers. You can then fool with the balance in the computer afterwards to bring up the shadows. But if the whites are blown out, that detail is gone, with no way to recover.
Woodworkers often have more tools than places to put them. I am no different. With a growing collection of tools, I was looking at new mechanics tool chests, but not really finding what I was looking for.
I came upon a heavy duty archival cabinet that looked like it might make a good tool chest. 28" deep and 46" wide with heavy duty steel dividers, it would be a great foundation for what I envisioned.
After discussing it with my lovely wife, we set to work making drawers of cherry and red oak we had on hand. About 10 hours later, we had the drawers built with sturdy plywood bottoms and dovetail joints throughout. Clearance and greed for drawer space dictated the use of routed drawer pulls over hardware. The thrift of the decision was timely, as fifteen pairs of 100 lb full extension slides can be hard on the pocket book.
Hoping to complete the installation of the slides soon, so I can begin finding a place for the cabinet in our (apparently) shrinking shop. Another cabinet must therefore be banished, but which one and to where? I shall take the standard philosophy of "let the tools decide where they want to be", and see what happens.
Cut a Holly tree for Restaurant, + Field-notes *LINK*
Keith Newton
Ben and I took samples of wood from the big dead hollow Swamp Chestnut Oak, which I mentioned in separate thread. I posted a photo in the link below.
Then Sunday night, we went out looking for frogs, or whatever I might find interesting to photograph. Whenever I get out with my camera, for about 5 years now, I usually put together an email to friends, which I call "Field-notes from Frogwarts", Frogwarts, is my name for the cabin, below is this week's episode, and a link to the pics.
Sunday was the warmest day of the year, so far, getting into the mid sixties. I knew this would be warm enough to get the first breeders into action, and hoping to finally be able to get shots of the Southern Leopard Frogs singing.
I was joined by my friend Ben Jackson, and glad to have him assisting me on this night. When we parked the truck, and listened for them, I guessed where they would be, about 1/3 mile out. By the time we got within 50' of them, they would go silent. Still, we hung out, and tried to triangulate on any near singers.
Finally we would spot one or two, but they dove before I could get close enough for a shot. Finally I did manage to find a pair mating. They were just out in water deeper than my boots. I got some poor shots, then we decided to try capturing and moving them. This was easy enough, because they never moved a muscle after Ben picked them up. I got a few in-hand shots, then we looked for some clean shallow water.
We then moved over to where we were hearing a lot of Spring Peepers and Cajun Chorus frogs. I scored another first by photographing an amplexus pair of CCFs as well as some more Spring Peepers.
Of course there were egg clutches all around in various stages of development. Just before leaving I spotted a really fresh mass which were black on one side, and tan on the other, without the clear jelly showing up. It takes a while for the fresh sperm to expand to full size. You can see a few larger ones in the first photo,
Keith, I've been reading that frogs, in general, are becoming endangered, even after surviving several previous mass extinctions of wildlife. Thanks for recording them. Your photographs are beautiful and your narrative fascinating.
Grant, several years ago I bought full extension runners form a cabinet supply shop for $4 each. Appeared to be identical to the ones Lowe's was selling for $13 except they did not come with screws. Later I found out that if I had asked the would have given me the screws. You get the screws if you buy the whole case. Might be worth a look for you.