Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Ever have used mnrl sprts that just won't settle?

Posts

Ever have used mnrl sprts that just won't settle?

#1

Ever have used mnrl sprts that just won't settle?

Tim Greif - West of Chicago

I normally recycle my used mineral spirits by letting the stuff settle for a few months, then decant off the clear stuff and toss the container with the sludge in the bottom. Recently, I used some Rustoleum Painters Touch metallic bronze paint for some yard light posts. Cleaned everything in the mineral spirits back in September. This stuff has still not settled out. I even ran it through a couple coffee filters first. I've only had this happen once before and I can't remember what finish I had used. Any ideas? Or should I just take it to the hazardous waste center?

Re: Ever have used mnrl sprts that just won't settle?

#2

Mine just jells

Lee Schierer in McKean, PA

When I leave left over mineral spirits in a can in just a few days, it turns to jelly with just a small surface layer of clear liquid.

Lee

Re: Ever have used mnrl sprts that just won't settle?

#3

Ellis Walentine

Define settle

Ellis Walentine

It sounds like one of two things is going on with your metallic paint in thinner situation. One is that there is some dyestuff in the paint that is totally soluble in your thinner and won't settle ever. The other possibility is that you're referring to metal flakes that float to the top of the thinnerand won't settle to the bottom. You can probably take care of solid particulate with a coffee filter, but colorant in the thinner might be there to stay. I'd probably use that thinner for some kind of cleaning jobs and use fresh thinner for your next paint excursion. Or let it evaporate and then throw it out with the trash.

Ellis

Re: Ever have used mnrl sprts that just won't settle?

#4

May have metallized plastic particles

Dick Coers

to give the metallic look. And they must be light enough to float.

Re: Ever have used mnrl sprts that just won't settle?

#5

Hmmm... you may be on to something

Tim Greif - West of Chicago

I never considered that there may be dye that is totally soluble in the thinner. You are correct that the metallic floaties have been taken care of by using the coffee filters. But the remaining thinner just sits there for months and never changes.

My main use for thinner (other than general cleaning) is for cleaning paint brushes used for oil based poly/varnish or oil based paint. Normally, that stuff settles out quite nicely and I can decant the clear thinner for another round of brush cleaning. I normally have a number of jars in varied levels of decant, depending on how many projects I've had to finish. This one just refuses to cooperate.

Thanks for the solution.

Tim