Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Lacquer over Lacquer Question

Posts

Lacquer over Lacquer Question

#1

Lacquer over Lacquer Question

Barry Irby

I am finishing a walnut dresser I just built. I had some Deft on hand and put on a base coat of that. I went looking for some and can't find it. I knew Lowe's and Home Depot did not have it anymore, but I though the might have a substitute. Nope. Sherwin Williams had Some commercial Sher-Wood gloss Lacquer. Did not buy it because it was Gloss. WoodCraft had Behlens Qualalac in Semigloss. I bought it. The question is can I put it over the base coat of Deft? How long should I let the Deft cure?

(In other words, What's a Luddite to do when they take the old stuff away?)

Re: Lacquer over Lacquer Question

#2

Re: Lacquer over Lacquer Question *LINK*

mdclor

Barry, did you try Walmart?


Deft at Walmart

Re: Lacquer over Lacquer Question

#3

Re: Lacquer over Lacquer Question

Barry Irby

It all shows up as Waterbourne in quarts. I will have to go to the store and check it out.

Re: Lacquer over Lacquer Question

#4

Re: Lacquer over Lacquer Question

mdclor

You may need to order it from the link or maybe they will ship it to your local store. I am certain there are other sources, but I chose Walmart because they are ubiquitous. :D

Re: Lacquer over Lacquer Question

#5

Re: Lacquer over Lacquer Question

Lee Schierer in McKean, PA

Last time I checked my local Lowes carried it.

Lee

Re: Lacquer over Lacquer Question

#6

Re: Lacquer over Lacquer Question

Dick Coers

Are you talking about Deft Clear Wood Finish, Brushing Lacquer? I would try a sample section, but I would say it is okay. The main difference is that Deft has ISOBUTYL ISOBUTYRATE which is used as a retarder solvent. Gives it a little more flow out time and slower cure. But again check a small section in the back if you can.

Re: Lacquer over Lacquer Question

#7

how much did you save?

Jerry Gibbs

Just to be a smart alec, how much did you save by using up the old Deft, including your efforts to find more?

Re: Lacquer over Lacquer Question

#8

Re: Lacquer over Lacquer Question

Bill Tindall, E.Tn.

You should have been able to buy any luster lacquer at Sherwin Williams. Some stores more specialize in dealing with Industrial Coatings. In any case any store should be able to order a gallon of delustered lacquer. Or take a container and stop by you nearest cabinet shop.

There is nothing about lacquer that would make it incompatible with other lacquer.

Lacquer lasts forever. Never any need to dispose of it.

I presume you are spraying this lacquer?

Re: Lacquer over Lacquer Question

#9

Re: Lacquer over Lacquer Question

Barry Irby

Yes I am spraying. I have an old Sears gun and while its not the latest and greatest, it works well for me.

I had about a quart of Deft, so I saved about $14. It was not that old, so another way to look at it is I used or spent $14. I just found a local hardware that still carries Deft. $14 a quart or $31 a gallon. Bought a gallon. It would have made more sense to find the new stuff first, but I would have used it either way.

I have a gallon of Sherwin Williams lacquer that is over thirty years old. as near as I can tell all or at least the VAST majority of the solids settled out. Its one of the square cans and it was on its side on the shelf. I wonder if I could remix it?

Re: Lacquer over Lacquer Question

#10

Re: Lacquer over Lacquer Question

Lee Schierer in McKean, PA

I've used Deft for years and even refinished some items that were several years old with new coats of Deft with no problem. The solvent in the new finish softens the previous layer to provide a good bond.

If you have old Deft on hand just add a bit of lacquer thinner to it to restore it to factory thickness or would that be thinness?

Lee