Wood shop plans/lighting
Lee Ohmart
I'm building a 24 x 32 addition on a concrete slab attached to the back of my garage with 10' walls to house a wood shop. The 32 ft SE facing wall will have an Anderson Frenchwood double door and three 3'x6' windows, the 24 ft SW wall will have two 3'x6' windows side by side topped with a half round and the NW wall will have several 2'x3' fixed windows set up high. The walls and roof will be made with structural SIP panels with the roof held up by three 24 ft. 8"x8" hemlock trusses. My plan for general lighting is to run two 8" fluorescent fixtures between each the spaces produced by the truss arrangement parallel to the trusses for a total of 8 fixtures. The fixtures will be two-bulb Columbia CS Slimline with reflectors running T-8 Sylvania Octron 800 XP Ecologic bulbs (CRI-85 CT-5000K and 5795 mean Lumens. For task lighting I'm using Cooper Metalux 4 ft. fixtures with reflectors over my planer, jointer, mortise and sharpening area. The T-8 bulb choices in the Sylvania line are Octron 800 XPS Ecologic 3 (CT-81 CRI-6500K 2850 mean Lumens), Octron XP ECO (CT88 CRI 8000K 2518 mean Lumens) or the Octron XP Ecologic (CT-85 CRI-6500K mean Lumen 2708). The 6500K bulbs seem like a good choice but that 8000K bulb is tempting for my older (I'm 59) eyes. Anybody have any experience with a high output bulb like this?



