Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Foam Brush for Shellac....

Posts

Foam Brush for Shellac....

#1

Foam Brush for Shellac....

Barry Irby

I decided to finish the drawers in the chest I am building with Shellac. I Bought a foam brush at Lowe's made by Wooster and it seems to be fine. Before I used it I called Wooster and they said it was OK with Alcohol. The packaging Mentions Poly and Paints but not Shellac. It is a two inch "brush" of black or dark charcoal grey foam and it worked well. It is chisel pointed and goes into corners well. There is minor wear on it so I don't think it is going to last a life time, but probably long enough to put at least another coat on nine drawers. It was about $3.50.

Re: Foam Brush for Shellac....

#2

Re: Foam Brush for Shellac....

David Yoho

I think there are foam brushes that are supposed to hold up in alcohol use but they cost more.

I recently bought 144 of the same brand 2" that Woodcraft and many others carry but only paid about 28-cents a piece. For that money, I could stand to go through a few for a small application but I still probably wouldn't use them with shellac or DNA.

Re: Foam Brush for Shellac....

#3

Urethane should be inert.

Bill Tindall, E.Tn.

A foam brush applies shellac in a nice level coat. They would be ideal if they didn't disintegrate. The black stuff they use for cheap "brushes" disintegrates in alcohol. However, the collection of brushes sold by Woodworkers supply (50 brushes for some small amount) lasts for the time it takes to get shellac on something. They swell but don't disintegrate.

The white or green upholstery form is inert. I cut "brushes" from it to apply shellac to something spinning on the lathe, or other small application jobs.

It is good to hear that there is another source. If you haven't tried foam for applying shellac, do try it.