Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

OT: Removing Billboard Post

Posts

OT: Removing Billboard Post

#1

OT:  Removing Billboard Post

don stephan

The property I bought for my workshop in Cincinnanti came with a pretty large billboard on a hollow metal post 24-30" diameter, installed 1985, 15 yr auto renewing lease "paying" 600 watts of light. Lease up for renewal 6/15, I'm planning to terminate lease. Unless sign company offers new lease with real rent payments, I want it gone.

I've been told by 3rd party that post likely extends down in concrete 15', usual practice is to cut off just below grade when "removed." Would I want to ask entire post and concrete be removed (big project and BIG hole to back fill) or be satisfied with cutting off say 24" below surface? Buried remainder could be significant expense if it ever had to be removed, but so close to property line that it probably wouldn't be an issue for me or maybe even for next owner. I'd think asking Lamarr (sign company) to remove entire post would make them more likely to write more favorable new contract, but with other issues they have been completely indifferent to my concerns and complaints.

Anyone have experience with this type of construction, and with billboards?

Re: OT: Removing Billboard Post

#2

microscopic similar situation

Bill Tindall, E.Tn.

Daughter bought a house with a 6" post in back yard and a 16" circle of concrete showing on the surface. I thought it was a clothes line post (wrong, satellite dish) Dad can get it out of there......

So I whacked it with my 10# sledge and nothing happened. Borrowed a large hammer drill and 1" bit. Drilled what I could see and whacked it to no effect.

Began digging. Got down 2' with no end insight. Drilled what I could see and drove a 1 1/4" point into the holes to fracture pieces off. Borrowed an industrial strength "Come- along" used for hoisting heavy machinery engines. Surely that would pull out what was left. It tipped it some.

Dug some more, drilled some more, fractured some more and at a 3' depth (2 days later) removed enough ballast that I could tow what was left out of the hole with the come-along.

The hole went down 4' and it had a yard of concrete in it. What surprised me was that the concrete had bonded to the metal.

I cannot begin to imagine removing your post. Maybe you can shop a lease to other advertising companies.

Re: OT: Removing Billboard Post

#3

Re: OT:  Removing Billboard Post

Barry Irby

I don't have any experience, so I am just speculating. Locally signage is a big deal with permits required to install them and regulations about location, size and so on. Of course it depends on the zoning you are in. Also, I see bill boards that look like they might have cost over a million dollars (electronic) and others that are antiquated and collapsing. So, think of the future value. Are you in sight of a major highway or interstate? Do they keep the sign rented or is it abandoned in place?

As for removing it, if you have them remove the entire thing, back filling the hole may be significant and may settle over time requiring you to fill it again. I doubt they will even consider removing the whole thing. Two feet below the surface seems optimistic to me, but would probably be acceptable.

600 watts? I think I would want some cash.

Re: OT: Removing Billboard Post

#4

Concrete bonded to steel?

Barry Irby

I did the same thing. I bought a house for my son. There were four generations of satellite dishes in the yard. The newer ones came out easily, but the oldest one was pretty well rooted. My truck had a bent bumper on it where it was kissed by a BMW. As a test, I hitched the bumper to the post and gave it a gentle yank. Nothing. Tried harder. Nothing. Tried as hard as I dared. Straightened the bumper a bit. Again, harder still. Bumper looked good, but the post was still rooted. Cut the pole off with a big pipe cutter about a foot in the ground and left it for the next generation. It was really nice to fix the bumper though. I think satellite dishes got smaller over time.

I sure hope the concrete bonded to the steel. Reinforcing rods would be pretty useless in concrete if it didn't.

Re: OT: Removing Billboard Post

#5

Re: OT:  Removing Billboard Post

Ralph Lipeles

To my way of thinking, they made a deal and put it in, when the deal is over they should take it out and restore the property to it's original condition. Check with a lawyer.

Ralph Lipeles

Re: OT: Removing Billboard Post

#6

Re: OT:  Removing Billboard Post

Yonak

What do you want ? Do you want some income or do you want an unrestricted view of the sky ?

If you want income, you could terminate the lease and then open the advertising space up for bids. That may result in a better offer than trying to leverage the current leasing agent.

Re: OT: Removing Billboard Post

#7

Re: OT:  Removing Billboard Post

Hank Knight

Don,

Do you have a copy of the original contract with the advertising company? It should spell out who is responsible for for removing the sign (and the post) when the contract terminates. If it does not, my guess is that the advertising company will balk at removing the whole thing and you may have to sue them to get them to do it.

Hank

Re: OT: Removing Billboard Post

#8

Re: OT:  Removing Billboard Post

Keith Newton

Don, If it comes down to all being your expense, it might make more sense to just torch it off at the top of the concrete, then just build up the grade over the top of it.

Re: OT: Removing Billboard Post

#9

TIMBER!

Bill Tindall, E.Tn.

just torch it off at the top .....please video the event and post somewhere.

Re: OT: Removing Billboard Post

#10

Yeah! I've never seen anyone actually Killed


Re: OT: Removing Billboard Post

#11

I'll bet . . .

Steve Mackay

. . . removal is in the contract SOMEWHERE, in very, VERY small print. That sort of company covers it's butt every way from Sunday.

I'll also bet it says "below grade" . . . and that's it. They scuff up around it, cut it off and kick some dirt over it.

Then you sue . . . and pay court costs.

Re: OT: Removing Billboard Post

#12

Before you do... consider: *LINK*

Grant in Iowa

Here's a link to a primer on leasing a billboard site from a landowners perspective. I just googled and up it came.

You might just consider keeping it if they offer you enough revenue.

I know of a farmer who gets a check for $630 per month for a cell tower on his land I think it was a 20 year lease. Pretty good deal if you ask me.

FWIW,

Grant in Iowa


unitedlandowners.com

Re: OT: Removing Billboard Post

#13

Re: TIMBER!

Keith Newton

Bill, My suggestion was not about how it gets taken down, but why bother with a big hunk of concrete being underground. I'll bet over in E TN, you probably have big boulders under the soil on your place.

However, if there was room for it to fall, I would not hesitate to take it down myself.

I think I might weld on a sturdy tab for a hydraulic jack to push on the opposite side of the way I wanted it to go, then leave 3 ~ 4" of hinge which would bend on the side I wanted it to fall.

Re: OT: Removing Billboard Post

#14

Re: Before you do... consider:

Chuck Kettler

Really should talk to others about utilizing your asset. I have a brother in law who has a high spot in the St Louis area. He got a cool million for a 20 year lease for a cell tower 15 years ago. Some due diligence is worth your time.