Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

table saw blade sharpener

Posts

table saw blade sharpener

#1

table saw blade sharpener

Joseph Mulherin, sr

I saw the video of this Chicago Electric blade sharpener on YouTube...liked it and went over to my local Harbor Freight store and bought it. Cost $44.99 + tax. Brought it home; read all the instructions on how to setup and use, then went out to the shop and did exactly what they said. Sharpened three blades--

two 7 1/4" blades and a 10" carbide blade which has been in the drawer since forever.

Think about this guys for the winter activity you need to do....buy one of these and set it up in your shop and spend a day or so sharpening all those blades you have laying around. Say a 10" blade costs $35, you

use it until it stops giving those clean cuts, then you just go and buy another one and lay the old one aside and forget about it...well, now is the tool and opportunity to get those blades ready for the Spring and Summer projects. I am well satisfied with the one I bought today.

Re: table saw blade sharpener

#2

Re: table saw blade sharpener

Lee Schierer in McKean, PA

Be careful using that sharpener. Exposures to tungsten carbide hard metal can

cause asthma and “hard metal lung disease.” The cobalt in tungsten carbide is the element of most concern. Tungsten carbide often contains nickel and chromium, which can also cause asthma. These lung conditions can develop

quickly or over a long period of time. Even low exposure levels can cause health problems. Your skin can also become sensitized to tungsten carbide hard metal, causing skin rash.

Be sure to wear a good respirator when grinding your carbide blades.

Lee

Re: table saw blade sharpener

#3

I'm sketical

Bill Tindall, E.Tn.

I have seen the machine that is used at the Misenheimer Saw Shop. I am sure it costs several thousand dollars. The diamond sharpening wheel likely costs several hundred dollars. I presume they have a machine of this sophistication because that is what is required to sharpen a carbide blade to the precision required. For the $12 it cost me to have a 40T blade sharpened I think I will stick with the pros to do it. Additionally, a saw shop like Misenheimer can fix any problem that develops with the plate. I had a rip blade that vibrated the saw. It turned out that the blade was warped. Worked perfect after they straightened it (free and it took about 5 min).

I recall when carbide blades first became available. They got a poor reputation because the local saw shops, used to dealing with steel blades, could not sharpen them to the precision required.

Re: table saw blade sharpener

#4

Re: table saw blade sharpener

Larry Clinton At Frankfort, (Central) Indiana

Guess I'm lucky to have a great saw sharpening shop right in my small city. They sharpen my 10" blades for about $15 with computer controlled machines, blades are properly balanced and straightened if necessary. They do a far better job than I could without spending $1000's for equipment. I do have a HF chain saw sharpener that does a fair job, but I really am not concerned with the cut or balance of the chains.

I mostly use Forrest WW2 blades, have a couple of other decent blades, for my Unisaw, and Forrest blades on my CMS. At the amount of work I do in my shop, I only visit the sharpener once a year or so.

(I know many scoff at the use of the Forrest blades, but if kept sharp and clean they do what I want them to do).

Re: table saw blade sharpener

#5

Skeptical #2

Mark Mandell - Gone Round In New Jersey

I bought a HF chain saw sharpener figuring I got a good deal for the $19.

I lasted for a year and then the switch died. So I call HF for the part and they tell me the switch is integral to the circuit board and the price is $49.

Not this kid . . .

So I spring for a real chain sharpener from Madsen's (logger's supply). $200 but this quality of the sharpening was hugely improved.

Being in NJ, I send my carbide TS blades to Forest. They come back as good or better than new. Circ blades cost more to sharpen than buy new so they get recycled.

Re: table saw blade sharpener

#6

Skeptic #3

Dick Coers

I would guess the diamond wheel provided is very coarse. Also temperature during the grinding process is very critical. Too hot and too course, and you will bet micro chipping at the edge of the tooth. I send my Forrest blades back to them to be sharpened. Another local shop for the lesser carbide tipped. He uses industrial equipment.

Re: table saw blade sharpener

#7

Re: table saw blade sharpener

Joseph Mulherin, sr

Thank you guys for your concerns. And the idea of sending all of them to a professional sharpener is a little beyond my financial ability. I shall use the respirator mask and wear an apron to stop any break-offs.

I have a bunch of old blades which just need a touch-up...5/8" holes and 1 1/4" holes in my Shopsmith steel blades. Am using the abrasive stone for the runs.

Re: table saw blade sharpener

#8

Re: table saw blade sharpener

Joseph Mulherin, sr

changed the abrasive stone disc and installed the 4" diamond blade. Found out that the motor was not tightened quite enough on the sliding bars; found a plate underneath which I tightened the nut and then vasalined the shafts so the motor runs smoothly on them. Have about 50 blades, carbide and steel to do.

Re: table saw blade sharpener

#9

Caution, Will Robinson . .

Mark Mandell - Gone Round In New Jersey

The diamond blade will do carbide but softer steel will tend to clod diamond abrasives. Use your AO wheel on non-carbide blades.

Re: table saw blade sharpener

#10

Re: Caution, Will Robinson . .

Joseph Mulherin, sr

The machine comes with a diamond blade and a carborendum disc which I shall try to use on the steel blades. Also you can set the machine to do the bevels on alternating teeth.

So far, I have done four carbide blades with three more to do...then the steel ones.(6)

Re: table saw blade sharpener

#11

Re: table saw blade sharpener

Larry

Boy, I wish I could get my blades sharpen for that price. I have to send mine 100 miles , and they charge $25.00 to sharpen a 40 tooth blade, .75 to replace a tooth and $6.00 to balance if needed!

Re: table saw blade sharpener

#12

Re: KO LEE

Tom in Toronto

I have a KO LEE I got given for free. The first one I bought was 100, and a guy pried it out of my hands for 200, another guy gave me one for free. So far I am -100 into this thing, not my usual speed. I actually am not sure one can sharpen a TS blade on this thing. But it will sharpen pretty much anything, so I suppose it is possible. Deindustrialization, gotta love it.

I wouldn't necessarily jump to the conclusion that a cheap jg wont work. HF makes some strangely useful stuff. Who would have thought tha a 10 piece of steel stuffed into a free piece of Oak, would do a better job of planing than all the stuff in factories in the US.